- Eagle Portable Multi-Gas Detector Instruction Manual

Eagle Instruction Manual Setup Mode • 29

Updating the display increment setting

1. Press the SHIFT/▼ button to place the prompt in the third line,

then press the POWER/ENTER button. The display increment

setting ﬂashes. The allowable settings are 0.2 VOL% (default) and

0.5 VOL%.

2. Press the AIR/▲ or SHIFT/▼ button to display the desired

display increment setting, then press the POWER/ENTER button

to enter the setting. The prompt ﬂashes.

Returning to the main menu

1. Press the SHIFT/▼ button. The ESCAPE message displays. (Press

the AIR/▲ button to return to the previous screen.)

2. Press the POWER/ENTER button to save the new settings. The

OTHER GAS SET message displays, then the Gas Combinations

menu displays.

3. To exit the Gas Combinations menu, press the SHIFT/▼ button

until the prompt is next to Channel 4, then press the SHIFT/▼

button again. The ESCAPE message displays.

4. Press the POWER/ENTER button. The message SAVING DATA

displays, then the main menu displays.

Updating toxics channel settings

This section describes how to update the target gas label, set a custom

gas label, and update the fullscale and display increment settings for a

toxic gas channel.

Updating the target gas label

1. From the main menu, select the GAS COMBINATIONS menu

option.

2. Press the POWER/ENTER button to display the Gas

Combinations menu.

3. Use the AIR/▲ or SHIFT/▼ button to place the prompt next to

the toxic gas channel (in this example H2S or CO).

4. Press the POWER/ENTER button. The toxic target gas label

ﬂashes. This indicates that this setting can now be updated.