Instructions for use

Copyright © 2006 Eagle Tree Systems, LLC
http://www.eagletreesystems.com
Instruction Manual for Battery Backup Harness
Document Version 1.0
Thank you for your purchase! This instruction manual will guide you through the installation and operation of your Battery Backup
Harness. Please read the entire manual carefully before proceeding. If, after you read the manual, you have further questions or
problems, see the Support page on http://www.eagletreesystems.com
for additional information, or email us at
[e-mail].
Supported Products
The Battery Backup Harness works with our MicroPower and Data Recorder products. It allows you to connect a secondary battery to
your Recorder, in case your primary battery or BEC dips below approximately 4.5v frequently, which will cause a “reboot” of the
Recorder.
Packing List
Your package should include the following: Battery Backup Harness, and a printed version of this manual.
Connecting the Battery Backup Harness to the
MICROPOWER
Connect the large (4 pin) end of the Battery Backup Harness
to the MicroPower, as shown in Figure 1. The small
(Futaba style) end of the Battery Backup Harness should
connect to a 4.5v to 6v (4 or 5 cell) battery pack. Since
current draw from the MicroPower is very low, even a very
small battery pack should give long run times.
Connecting the Battery Backup Harness to your Data
Recorder
For Data Recorders, the Battery Backup Harness connects
in the same location and polarity as the USB cable. Please
see the Data Recorder instruction manual for information on
how to connect the Battery Backup Harness.
Limited Warranty
Eagle Tree Systems, LLC, warrants the Battery Backup Harness
to be free from defects in materials and workmanship for a period of one (1) year from the date of original purchase. This warranty is
nontransferable. If your unit requires warranty service during this period, we will replace or repair it at our option. Shipping cost to us is your
responsibility. To obtain warranty service, email [e-mail]
for further instructions.
This limited warranty does not cover:
• The Software included with the Product. See the Software license agreement for more information on Software restrictions.
• Problems that result from:
o External causes such as accident, abuse, misuse, or problems with electrical power
o Servicing not authorized by us
o Usage that is not in accordance with product instructions
o Failure to follow the product instructions
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE
TO STATE (OR JURISDICTION TO JURISDICTION). OUR RESPONSIBILITY FOR MALFUNCITONS AND DEFECTS IN HARDWARE IS
LIMITED TO REPAIR AND REPLACEMENT AS SET FORTH IN THIS WARRANTY STATEMENT. ALL EXPRESS AND IMPLIED
WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES AND CONDITIONS OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN TIME TO THE TERM OF THE LIMITED
WARRANTY PERIOD AS DESCRIBED ABOVE. NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE
LIMITED WARRANTY PERIOD HAS EXPIRED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THIS LIMITATION MAY NOT APPLY TO YOU.
WE DO NOT ACCEPT LIABILITY BEYOND THE REMEDIES PROVIDED FOR IN THIS LIMITED WARRANTY OR FOR
CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY LIABILTY FOR THIRD-PARTY CLAIMS
AGAINST YOU FOR DAMAGES, FOR PRODUCTS NOT BEING AVAILABLE FOR USE, OR FOR LOST DATA OR LOST SOFTWARE.
OUR LIABILITY WILL BE NO MORE THAN THE AMOUNT YOU PAID FOR THE PRODUCT THAT IS THE SUBJECT OF A CLAIM. THIS
IS THE MAXIMUM AMOUNT FOR WHICH WE ARE RESPONSIBLE. SOME STATES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION
OR EXCLUSION MAY NOT
APPLY TO YOU.