Product Manual

COMPRESSOR MAINTENANCE SCHEDULE
DAILY OR BEFORE EACH USE
Drain condensation from air receiver
Check for any unusual noise or vibration
Be sure all nuts and bolts are tight
WEEKLY
Turn off power. Clean dust and foreign matter from cylinder head, motor,
fan blades, intercooler and air receiver.
Clean air filter by opening air filter, removing filter element and cleaning
it thoroughly.
Worn or dirty filters should be replaced.
MONTHLY
Inspect unit for leaks.
Tighten joints if leaks are observed.
QUARTERLY OR 300 HOURS (Whichever comes first)
Inspect the air receiver for corrosion or other damage
Replace air filter (more often if compressor is used near paint
spraying operations or in dusty environments).
Page 7