User`s manual

- 18
5.Clearance of tension rod ball is too
big
Change
6. Steering knuckle and master pin is
not lubricating
Add Lube
7.Steering shaft or its plastic cover
wear out
Change
1.Rack of redirector wear out Change Redirector
2.Screw plug of Redirector is too tight Adjust
3.Toe-in adjust improperly Adjust
4.Bearing of front wheel wear out Change
5.Tie rod ball and joint wear out Change tie rod
Steering unstable
（wheels flirt）
6.Redirector loose Tighten
1.The pressure of the two front tires
is different
Inflate
2.Toe-in is too big or too small Adjust
3. Tightness of the left and right drum
bearing of front wheels is different
Adjust
4.Brake of one wheel is too tight Adjust or Change
5.Spring shock absorber is abnormal Change
Deflected Running
6.Front suspension loose Change
1.Tire pressure is abnormal or left
and right tire doesn’t be exchanged
for a long time
Inflate or exchange
2.Toe-in is improper Adjust
3.Drum bearing loose Change
4. U type Bolt of Leaf Spring loose Tighten
5. Rim distort, frame distort Tighten
6.Brake force of each wheel is
different
Adjust
Driving System
Abnormal Tire Fray
7. Overexert accelerate or brake
frequently
Alter operation
1.Master cylinder and/or wheel
cylinder damage、vitta leak oil
Check, eliminate,
change
2.Brake fluid is insufficient or empty Add fluid
3.Air enters into oil pipe Let air
4.Free travel of Brake pedal is too
long or the clearance of arrester is
too big
Adjust
5.Brake drum wears out or distort Change
Brake System
Brake fail
6.Master cylinder leaks oil internally Change