User`s manual

- 19
1.The clearance of left brake drum
shoe and right brake drum shoe is
different
Adjust
2.Oil on one arrester’s brake shoe Dispose or change
3.tyre pressure is different Repair or Change
4.One wheel cylinder’s piston blocks Adjust
5.Wheel alignment improperly Adjust
Braking deviation
6.Brake drum becomes out of round Change
1.Brake pedal has no free travel Adjust
2.Clearance between brake shoe and
drum is too small or releasing spring
is disable.
Adjust or Change
3.Piston of wheel cylinder is
ineffective
Check、Change
4.Piston of master cylinder is
ineffective
Change
Braking drag
5.Parking brake is ineffective Change spring
1.Shoes distort Change
2.Brake facing wear out Change
3.Eyewinker in brake system Check, Eliminate
Braking noise
4.Brake drum breach, scrape to
uneven
Change
10. Wiring Diagram
1) Wiring Diagram of Series System (FIG.1)
2) Wiring Diagram of Sepex System (FIG.2)
This manual tries to be as sound and elaborate as possible in literal and figurative description as well as
technical description on the basis of existent data. At the same time, our company reserves the right to alter
the content of this manual and this manual is subject to change without prior notice; in addition, our company
has the final say on the interpretation of this manual.
All rights reserved.