User manual

B.If your operating system is Mac OS 8.6, the software of Mass

Storage Support 1.3.5 is required to install. You can download it

from the Apple Software Updates web site.

C.If your operating system is Mac OS 9.0 or above versions, you

don’t have to install any driver. Once you plugging the USB

external enclosure, the Hard Drive icon will appear on the

desktop.

UNPLUGGING THE HARDWARE

Windows ME, 2000, XP and above versions

1.Double-click the Safe Remove Hardware icon found on the right side of

the taskbar to stop the device.

2.Select USB Disk and click the [Stop] button to safely remove the device.

You can also click first on the Display device components to show the

detailed information of the USB disk.

DRIVERS INSTALLATION

Windows ME, 2000, XP and above versions

Under the above mentioned system, you don’t have to install additional

device drivers. The system will detect a USB Mass Storage Device

automatically whenever you plugging the USB external enclosure into

your computer.

1.Once you plugging the USB external enclosure, system will assign a

drive letter to the device and will usually designate it as [USB DISK].

2.After the system installed the driver of USB DISK, double click on

[My Computer], a new drive disk is added in a few seconds.

MAC OS

A.This USB external enclosure is supported by the Mass Storage Support

1.3.5 in Mac OS. You don’t need to install any drivers.