Specifications

50
To use Depth Cursor:
1. From the Sonar Page, press MENU|↓ to DEPTH CURSOR|ENT.
2. Press ↓ to lower the cursor line. Press ↑ to raise the cursor line.
3. Press
EXIT to clear the Depth Cursor from the screen.
Depth Range - Automatic
When Automatic Depth Range is activated, the bottom signal is auto-
matically placed in the lower half of the screen.
The Depth Range Control Scale.
To turn on Automatic Depth Range:
1. From the Sonar Page, press MENU|↓ to DEPTH RANGE|ENT. The Depth
Range Scale appears.
2. Press ↑ ↓ to select a different depth range. A blue bar highlights the
selected range. Range numbers in gray cannot be selected.
3. When the new range is selected, press
EXIT to clear the menu.
Depth Range - Manual
You have complete control over Depth Range when the unit is in man-
ual mode. There are 12 depth ranges, from 5 feet to 800 feet.
To switch to Manual Depth Range:
1. First, turn off Automatic Depth Range by pressing MENU|↓ to AUTO
DEPTH RANGE|ENT.