Operating Instructions and Installation Instructions

Main Menu with Sonar Simulator command selected.

The Simulator is turned off when the box is unchecked.

NOTE:

If you turn the unit on before attaching a transducer, it may enter a

demo mode. The words "demo mode" flash on the bottom of the

screen and a sonar chart plays much like the simulator. Unlike the

simulator, the demo mode is for demonstration only and will auto-

matically stop as soon as you turn the unit on with a transducer at-

tached. The simulator will continue to function normally.

Stop Chart

There may be a time when you want to turn off the sonar. This com-

mand turns off the sonar and stops the chart from scrolling. Sonar re-

starts automatically each time you turn the unit back on.

Press

MENU|↓ to STOP CHART|ENT|EXIT.

To turn on sonar and start the chart scrolling again, repeat the previous

step.