Operating Instructions and Installation Instructions

4. The Edit Waypoint menu appears. Press

EXIT repeatedly to get back

to the main page display.

Set a Waypoint by Projecting a Position

This feature creates a waypoint at a location a specific distance and

bearing from a reference position. The reference position can be a way-

point, map feature or Point of Interest.

1. Press

WPT|↑ to MY WAYPOINTS|→ to NEW|ENT.

2. Press ↓ to

PROJECTED POSITION|ENT|→ to CREATE|ENT.

3. Press

CHOOSE REFERENCE|ENT. Use ↑ and ↓ to select a waypoint, map

feature or Point of Interest. When a selection has been made press

ENT.

Press →, ↑ or ↓ to choose a subcategory, then press ENT. Highlight

NAME|ENT. Spell out the name of the desired reference point in the Find

By Name box or press

ENT to the find the point in the list below. After

you have selected a point, press

ENT. That will launch the waypoint in-

formation window. Highlight

SET REFERENCE and press ENT.

4. Press ← ↓ to DISTANCE|ENT. Press ↑ or ↓ to change the first character,

then press → to the next character and repeat until the distance is cor-

rect. Press

ENT.

5. Press ↓ to

BEARING|ENT. Press ↑ or ↓ to change the first character,

then press → to the next character and repeat until the bearing is cor-

rect. Press

ENT.

6. Press ↑ to

PROJECT|ENT. The Edit Waypoint menu appears. Press

EXIT|EXIT to get back to the main page display or press EXIT|ENT to

navigate to the new waypoint.