Product Manual

1. INSTALLATION
Proper care, maintenance and lubrication ensures longevity. The compressor
should always be level for proper lubrication. Do not over tighten foot bolts
as excessive vibration may occur. Use only in a clean, dry, and well-ventilated
area. The compressor has heat dissipation fins for proper cooling. Keep
the fins and other parts that collect dust clean. Do not place rags or other
materials on top of the compressor, as this obstructs cooling and can be a
fire hazard.
2. BREAK-IN PROCEDURE
There is no break-in requirements for this model.
3. BEFORE OPERATING THE AIR COMPRESSOR, PLEASE
CHECK THE FOLLOWING CAREFULLY:
1. Check to see that nuts and bolts are all snug.
2. Check if the quantity and quality of oil is correct.
3. If the intake filters are dirty, they should be replaced or
cleaned.
4. COMPRESSOR LUBRICATION
ALWAYS CHECK THE OIL LEVEL AND QUALITY
BEFORE START-UP. DO NOT ADD OR CHANGE
OIL WHILE THE UNIT IS RUNNING. USE ONLY
RECOMMENDED NON-DETERGENT OIL.
Recommended Oil:
Eagle Compressor Oil #EAOIL10 (1 litre)
#EAOIL40 (4 litres)
Eagle compressor oil is a non-detergent mineral oil formulated with
additives to help minimize carbon build-up, increase ring life, and reduce
oil consumption, for use at ambient temperatures of 0º to 30º C (32ºF - 86ºF).
Page 5
INSTALLATION