Specifications
How to Obtain Service
ARRIVAL ALARM
We
back
your
investment in
quality products
with
quick, expert
service and
genuine
Eagle replacement parts.
If
you
need service or
repairs,
contact the
authorized
Eagle
Service Center nearest
you.
The enclosed Service Center List
will
help you
find the closest
repairfacility.
If desired
you
can contactthe
Factory
Customer Service Center.
Transportation expenses
to us or to the Authorized
Service Center are
your
responsability.
The
product
will
be
returned
to
you by
surface carrier at no
charge.
Factory Repair
If
your
unit needs
repair,
and
you
wish to write or send a
product
to the
factory,
use
the
following
address:
EAGLE ELECTRONICS
Att: Service
Department
12000 E
Skelly
Dr
Tulsa,
OK
74128-2486
You
can call or write to an authorized
Eagle
Service Center or the
Factory
Customer Service
Department
before
sending your
unit in for
rppair.
A
technician
may
be able to solve the
problem
and save
you
the inconvenience of
returning your
unit.
For the
Eagle factory
customer service
department,
call 1-918-234-1452.
When
sending
a
product
to the
factory
or a service
center,
we recommend
you
do the
following:
1. Use the
original
box and filler material the
product
was
packed
in when
shipping your product.
2.
Always
insure the
parcel against damage
or
loss
durlhg shipment.
For
proper testing, repair,
and
service,
send a brief note with the
product
describing
the
problem.
Be
sure to include
your
name,
return
shipping
address,
and a
daytime
telephone
number.
To
adjust
the
arrival
alarm, press
the ALARM
key
while a loran or
plotter
screen is
displayed.
The screen shown above left
appears.
Press the
key adjacent
to the
up
arrow on the arrival alarm's menu to
increase the
radius,
the down arrow to decrease it or turn
it
off.
Press
the
key adjacent
to the EXIT
label to return to the loran screen.
C.D.I. ALARM
The C.D.I.
alarm sounds when
you
are off course
by
the same
amount as the alarm
setting.
For
example,
if the alarm
setting
is .1
nautical
miles,
then the alarm will sound if
you're
off course
by
.1
nautical
miles. The C.D.I. alarm
adjust
also
changes
the O.D.l.
range
on
the
Steering
Screen.
To
adjust
the C.D.I.
alarm,
press
the
ALARM.key
while a loran screen
is
displayed.
The screen shown
above left
appears.
Now
press
the
key
adjacent
to the
up
arrow on the
C.D.l.'s alarm menu to increase
it,
the down arrow to decrease it or turn
it off. If the alarm is turned
off,
the C.D.I. indicator's limits are
preset
to .1
nautical mile. Press the
key
adjacent
to the EXIT label to return to
the loran screen.
38
67
The arrival alarm sounds a tone when
your position
is within the
alarm's radius of a
waypoint.
For
example,
the alarm will Sound if
you
come with .1 nautical miles of a
waypoint
if
the arrival alarm's
setting
is .1 nautical mile.
Arrival
Radius
a A r r iv a. 1
Radius
a C.D.L
Linit
<MUTE
ALARM
I
S
a C D. I.
Linit
C
MUTE ALARM
I
IMPORTANT: Be sure to include
proof
of
purchase
when
sending
the
product
if it is still in
warranty.
PDF compression, OCR, web-optimization with CVISION's PdfCompressor