Installation Instructions
Table Of Contents
Ariel Platinum
TB351 Toilet
Ariel Platinum TB351 Contemporary
European Toilet
• GPF 0.8/ 1.32
• Waste Pipe Diameter 2"
• Waste Pipe Rough-IN 12"
• Water Supply Thread 1/2" T hreaded Male connection,
1/2" Female hose with 7/8" Male Adaptor with compres-
sion tting
• Water Supply Location (measurement from side of the
toilet) LEFT 3.5" X 13"
• Width of rear of toilet at 6 -inches from oor: 12"
• Shut-off valve clearance from centerline measured 6"
from oor: 6" (+3")
• Waste Pipe Connection: One t technology connecting
pipe
• Flush Location: Top
• Flush Type: Dual
• Soft Close: Yes
Meets or Exceeds the following Specications:
• ASME A112.19.2-2008/CSA B45.1-08 for Vitre-
ous China Fixtures
• UPC
• Watersense
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM
DIMENSION OF 305MM (12”) FROM FINISHED WALL TO C/L OF TOILET.
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED,
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY
• Bowl Height: 16"
• Overall Depth: 24"
• Overall Width: 15"
• Overall Height: 26"
Dimensions:
Nominal Dimensions
Compliance Certication
NOTES:
IMPORTANT: Dimensions of xtures are nominal and may vary within
the range of tolerance established by ANSI Standard A112.19.2
These Mesurements are subject to change. No responsibility is assu-
med for use of superseded or voided pages.