Datasheet

524
01
02
03
04
10
14
17
18
19
22
31
41
44
51
56
57
61
70
71
82
84
92
95
96
97
99
ST
Technical data
Shock resistance
(Single impacts, semi-sinusoidal)
15 g for 11 ms, as per IEC 60512-4-3, IEC 60068-2-27
Vibration resistance
(Sinusoidal)
10 g at 10 Hz … 1500 Hz, amplitude 0.75 mm,
as per IEC 60512-4-4, IEC 60068-2-6
Climate resistance
Standard condition, as per IEC 60068-2-3 and 2-30
Changing condition, as per IEC 60068-2-14 and 2-33
Approvals
Approbations
CB (IEC 61058)
CSA
ENEC (EN 61058)
Germanischer Lloyd
UL
Declaration of conformity
CE
Stop Switch
Switching system
Switching element SE16 with solder terminal
Self-cleaning, double-break snap-action switching system
1 NCcontact and 1 NO contact per switching element.
Available with up to two switching elements (2 NC contact and
2 NO contact)
Switching element SE 2.8 mm with solder-/ plug-in terminal
Self-cleaning, double-break snap-action switching system
(1 NC contact and 1 NO contact)
Low-level switching element with universal terminal
Single-break momentary contact switch system. Two contacts
per switching element with a combination of NC and NO contacts
Material
Actuator housing
Polyamide (PA66), Thermoplastic elastomer (TPE)
Lens
Polyamide (PA6)
Actuator
Polybutylene Terephthalate (PBT)
Label
R-640 polyester
Switching element
Solder terminal Polyamide (PA 6.6)
Solder-/plug-in interminal Diallyl Phthalate (DAP),
Polyamide (PA),
Polysulfone (PSU)
Universal terminal Polysulfone (PSU)
Contact material
Snap action solder terminal gold-plated silver
Snap action plug-in/solder terminal gold-plated silver
Low level plug-in/solder/PCB terminal gold-plated
Mechanical characteristics
Terminals
Solder or solder/plug terminal, 2.8 × 0.5 mm
Universal terminal with 2.0 × 0.5 mm plug-in/solder
and PCB terminal
Tightening torque
for fixing nut max. 50 Ncm
Actuating force
4 … 6 N (depending on the switching element)
Mechanical lifetime
100 000 cycles of operation
Electrical characteristics
Switch rating
Solder terminal min. 5 VAC/DC, 1 mA
max. 250 VAC/DC, 5 A
Solder-/plug-in terminal min. 5 VAC/DC, 1 mA
max. 250 VAC/DC, 5 A
Universal terminal min. 100 μV/10 μA
max. 42 VAC/DC, 100 mA
Environmental conditions
Storage temperature
–40 °C … +85 °C
Operating temperature
–25 °C … +55 °C
Degree of front protection
IP 65
Approvals
Approbations
UL
CSA
CB
ENEC (EN 61058)
Declaration of conformity
CE
51