Datasheet

Technical data
Actuator with snap-action switching element
Switching system
Single-break, snap-action switching system
1 normally open contact
Material
Material of contact
Gold plated Silver, Silver plated
Switch housing
Plastic
Actuator housing
Plastic, colour black
Mechanical characteristics
Terminals
Universal terminal
Max. wire diameter 2 x 0.8
mm
Max. wire cross-section of stranded cable 1 x 0.75
mm²
Plug-in terminal 2.0
mm x 0.5 mm
For these terminals we offer sockets for PCB mounting.
Tightening torque
For xing nut max. 0.2
Nm
Actuating force
1.6
N
Actuating travel
Approx. 2.8
mm ±0.2 mm
Mechanical lifetime
2 million cycles of operations
Electrical characteristics
Switching voltage and switching current
Silver plated:
Max. 50 VAC, 0.8 A / 72 VDC, 0.7 A
Min. 20 V, 10 mA
Gold plated:
Max. 50 VAC, 100 mA / 72 VDC, 70 mA
Min. 100 μV, 50 μA
Electric strength
2500 VAC, 50 Hz, 1 minute between all terminals and earth,
as per IEC 60512-2-11
Ambient conditions
Operating temperature
Without illumination – 25 °C … + 65 °C
With incandescent lamp – 25 °C … + 45 °C
With LED – 25 °C … + 65 °C
For indicators and illuminated pushbuttons mounted as a block,
make sure the heat can escape freely.
Storage temperature
– 40 °C … + 85 °C
Protection degree
IP40 front side, as per DIN EN 60529
Approvals
Conformities
2011 / 65 / EC (RoHS)
01/2019 § eao.com
423
19
01
02
03
04
09
14
17
18
19
22
31
41
45
51
56
57
61
70
71
82
84
92
96