Datasheet

Technical data
EAO reserves the right to alter specications without further notice.
Actuator with low-level switching element
Switching system
This low-level switching system was developed for low switching
voltages and currents.
Single-break momentary contact, as normally open or normally
closed with 4 independent points of contact.
1 normally open or 1 normally closed contact.
Material
Material of contact
Gold plated
Actuator housing
Plastic, colour black
Mechanical characteristics
Terminals
Universal terminal
Max. wire diameter 2 x 0.8
mm
Max. wire cross-section of stranded cable 1 x 0.75
mm²
Plug-in terminal 2.0
mm x 0.5 mm
For these terminals we offer sockets for PCB mounting.
Tightening torque
For xing nut max. 0.2
Nm
Actuating force
1.8
N ± 0.3 N
Actuating travel
Approx. 2.8
mm ± 0.2 mm
Mechanical lifetime
5 million cycles of operation
Electrical characteristics
Switching voltage and switching current
100 mA at 42 VAC / VDC
Electric strength
2500 VAC, 50 Hz, 1 minute between all terminals and earth,
as per IEC 60512-2-11
Ambient conditions
Operating temperature
Without illumination – 25 °C … + 65 °C
With incandescent lamp – 25 °C … + 45 °C
With LED – 25 °C … + 65 °C
For indicators and illuminated pushbuttons mounted as a block,
make sure the heat can escape freely.
Storage temperature
– 40 °C … + 85 °C
Protection degree
IP40 front side, as per DIN EN 60529
Shock resistance
(Single impacts, semi-sinusoidal)
15 g for 11 ms, as per IEC 60512-4-3, DIN EN 60068-2-27
Approvals
Conformities
2011 / 65 / EC (RoHS)
eao.com § 01/2019
424
19
01
02
03
04
09
14
17
18
19
22
31
41
45
51
56
57
61
70
71
82
84
92
96