Datasheet

38
03.2009
44
Accessories
Continuation see next page
Continuation see next page
Marking information see in chapter Marking
Continuation see next page
Continuation see next page
Technical drawing from page 59
Front
Lens
Lens
Ø 28 mm
Typ-Nr.
e
Lens
for Indicator and Illuminated pushbutton, front illumination
Pushbutton markable
Plastic blue transparent flush 44-966.6 0.001
Plastic colourless transparent flush 44-966.7 0.001
Plastic green transparent flush 44-966.5 0.001
Plastic red transparent flush 44-966.2 0.001
Plastic yellow transparent flush 44-966.4 0.001
Marking plate for Lens
Marking plate Typ-Nr.
e
Marking plate for Lens
for Indicator and Illuminated pushbutton, front illumination
Pushbutton markable
Plastic white translucent 44-962.9 0.001
for Pushbutton markable Plastic black opaque 44-961.0 0.001
Plastic blue opaque 44-961.6 0.001
Plastic green opaque 44-961.5 0.001
Plastic red opaque 44-961.2 0.001
Plastic yellow opaque 44-961.4 0.001
Lens cap
Lens cap
Ø 28 mm
Typ-Nr.
e
Lens cap
for Indicator full face illumination
with sealing ring
Plastic blue transparent 44-965.6 0.003
Plastic colourless transparent 44-965.7 0.003
Plastic green transparent 44-965.5 0.003
Plastic red transparent 44-965.2 0.003
Plastic yellow transparent 44-965.4 0.003
Front bezel set without label support, flush mounting
Front bezel
b 36 x 36 mm
Typ-Nr.
Ø 36 mm
Typ-Nr.
Technical drawing
e
Front bezel set without label support, flush mounting
for Illuminated pushbutton and Pushbutton, Selector- and
Keylock switch, Interlocking pushbutton
the mounting depth extends for 12 mm
Plastic black 44-946.03 44-946.03-A 43 0.010
for Indicator and Potentiometer
the mounting depth extends for 3 mm
Plastic black 44-946.01 44-946.01-A 43 0.006