Datasheet

43
03.2009
44
Accessories
Continuation see next page
Contacts: NO = Normally open, NC = Normally closed
Terminals: ST = Screw terminal
Technical drawing from page 59, Circuit drawing from page 73
Continuation see next page
Terminals: ST = Screw terminal
Technical drawing from page 59, Circuit drawing from page 73
Continuation see next page
Front adaptor marking :
Terminal marking and distinctive number as per DIN EN 50013. The operating characters are marked on the switching
elements beside the screw terminals
Continuation see next page
Contacts: NO = Normally open, NC = Normally closed
Terminals: ST = Screw terminal
Technical drawing from page 59, Circuit drawing from page 73
Slow-make switching element non-stachable, front mounting
Switch rating
Contacts Contact material Terminals
Typ-Nr.
Technical drawing Circuit drawing
e
Slow-make switching element
non-stachable, front mounting
500 VAC, 10 A 1 NO Hard silver ST 44-121 39 39 0.010
Forced opening as per EN IEC 947-5-1 500 VAC, 10 A 1 NC Hard silver ST 44-111 39 38 0.010
Lamp element, front mounting
Terminals
Typ-Nr.
Technical drawing Circuit drawing
e
Lamp element, front mounting
Lamp socket BA9s, max. 2.6 W
ST 44-524 40 3 0.011
Base adaptor
Marking Typ-Nr.
e
Base adaptor 1 3 2 44-905 0.006
Slow-make switching element non-stackable, base mounting
Switch rating
Contacts Contact material Terminals
Typ-Nr.
Technical drawing Circuit drawing
e
Slow-make switching element
non-stackable, base mounting
500 VAC, 10 A 1 NO Hard silver ST 44-221 41 39 0.010
Forced opening as per EN IEC 947-5-1 500 VAC, 10 A 1 NC Hard silver ST 44-211 41 38 0.010