Datasheet

44
Devices raised mounting
14
03.2009
Continuation see next page
Essential Accessories:
d Base adaptor page 43
d Front adapter, front mounting page 42
d Slow-make switching element stackable, front mounting page 42
Continuation see next page
Pushbutton actuator
Front protection Switching action
Lens mounting type Front ring Lens
Ø 28 mm
Typ-Nr.
Mounting dimensions Technical drawing Circuit drawing
e
Pushbutton actuator
non-markable
IP 65 M level with bezel Plastic matt-chrome Plastic black 44-701.20 1 20 2 0.013
Plastic blue 44-701.26 1 20 2 0.013
Plastic green 44-701.25 1 20 2 0.013
Plastic red 44-701.22 1 20 2 0.013
Plastic white 44-701.29 1 20 2 0.013
Plastic yellow 44-701.24 1 20 2 0.013
Plastic matt-grey Plastic black 44-701.60 1 20 2 0.013
Plastic blue 44-701.66 1 20 2 0.013
Plastic green 44-701.65 1 20 2 0.013
Plastic red 44-701.62 1 20 2 0.013
Plastic white 44-701.69 1 20 2 0.013
Plastic yellow 44-701.64 1 20 2 0.013
lower than bezel Plastic matt-chrome Plastic black 44-704.20 1 20 2 0.015
Plastic blue 44-704.26 1 20 2 0.015
Plastic green 44-704.25 1 20 2 0.015
Plastic red 44-704.22 1 20 2 0.015
Plastic white 44-704.29 1 20 2 0.015
Plastic yellow 44-704.24 1 20 2 0.015
Plastic matt-grey Plastic black 44-704.60 1 20 2 0.015
Plastic blue 44-704.66 1 20 2 0.015
Plastic green 44-704.65 1 20 2 0.015
Plastic red 44-704.62 1 20 2 0.015
Plastic white 44-704.69 1 20 2 0.015
Plastic yellow 44-704.64 1 20 2 0.015
raised above bezel Plastic matt-chrome Plastic black 44-703.20 1 20 2 0.015
Plastic blue 44-703.26 1 20 2 0.015
Plastic green 44-703.25 1 20 2 0.015
Plastic red 44-703.22 1 20 2 0.015
Plastic white 44-703.29 1 20 2 0.015
Plastic yellow 44-703.24 1 20 2 0.015
Plastic matt-grey Plastic black 44-703.60 1 20 2 0.015
Plastic blue 44-703.66 1 20 2 0.015
Plastic green 44-703.65 1 20 2 0.015
Plastic red 44-703.62 1 20 2 0.015
Plastic white 44-703.69 1 20 2 0.015
Plastic yellow 44-703.64 1 20 2 0.015