Datasheet

44
Devices flush mounting
29
03.2009
Continuation see next page
Essential Accessories:
d Front adapter, front mounting page 42
d Front bezel set without label support, flush mounting page 38
d Slow-make switching element stackable, front mounting page 42
Continuation see next page
Pushbutton actuator, flush mounting
Front protection Switching action
Lens Mounting type Front ring Lens Typ-Nr.
Mounting dimensions Technical drawing Circuit drawing
e
Pushbutton actuator, flush
mounting
non-markable
IP 65 M level with bezel Plastic matt-chrome Plastic black 44-701.20 5 11 2 0.013
Plastic blue 44-701.26 5 11 2 0.013
Plastic green 44-701.25 5 11 2 0.013
Plastic red 44-701.22 5 11 2 0.013
Plastic white 44-701.29 5 11 2 0.013
Plastic yellow 44-701.24 5 11 2 0.013
Plastic matt-grey Plastic black 44-701.60 5 11 2 0.013
Plastic blue 44-701.66 5 11 2 0.013
Plastic green 44-701.65 5 11 2 0.013
Plastic red 44-701.62 5 11 2 0.013
Plastic white 44-701.69 5 11 2 0.013
Plastic yellow 44-701.64 5 11 2 0.013
lower than bezel Plastic matt-chrome Plastic black 44-704.20 5 11 2 0.015
Plastic blue 44-704.26 5 11 2 0.015
Plastic green 44-704.25 5 11 2 0.015
Plastic red 44-704.22 5 11 2 0.015
Plastic white 44-704.29 5 11 2 0.015
Plastic yellow 44-704.24 5 11 2 0.015
Plastic matt-grey Plastic black 44-704.60 5 11 2 0.015
Plastic blue 44-704.66 5 11 2 0.015
Plastic green 44-704.65 5 11 2 0.015
Plastic red 44-704.62 5 11 2 0.015
Plastic white 44-704.69 5 11 2 0.015
Plastic yellow 44-704.64 5 11 2 0.015
raised above bezel Plastic matt-chrome Plastic black 44-703.20 5 11 2 0.015
Plastic blue 44-703.26 5 11 2 0.015
Plastic green 44-703.25 5 11 2 0.015
Plastic red 44-703.22 5 11 2 0.015
Plastic white 44-703.29 5 11 2 0.015
Plastic yellow 44-703.24 5 11 2 0.015
Plastic matt-grey Plastic black 44-703.60 5 11 2 0.015
Plastic blue
44-703.66 5 11 2 0.015
Plastic green 44-703.65 5 11 2 0.015
Plastic red 44-703.62 5 11 2 0.015
Plastic white 44-703.69 5 11 2 0.015
Plastic yellow 44-703.64 5 11 2 0.015