Datasheet

47
03.2009
44
Accessories
for lamp voltage reduction
Continuation see next page
Please keep to the country specific security rules.
for fitting with series resistors
Continuation see next page
>
Continuation see next page
Series resistor
Operating voltage Typ-Nr.
e
Series resistor
10 kΩ, for filament lamp 48 V / 1.2 W
240 V 44-957.050 0.002
2.7 kΩ, for filament lamp 48 V / 1.2 W 110 V 44-957.010 0.002
3.3 kΩ, for filament lamp 48 V / 1.2 W 125 V 44-957.020 0.002
4.7 kΩ, for filament lamp 48 V / 1.2 W 145 V 44-957.030 0.002
6. kΩ, for filament lamp 110 ... 130 V / 2.4 W 230 V 44-957.060 0.002
Terminal plate empty
Typ-Nr.
e
Terminal plate empty
10 spaces 125 x 60 x 15 mm
44-959.10 0.045
15 spaces 187.5 x 60 x 15 mm 44-959.15 0.090
20 spaces 250 x 60 x 15 mm 44-959.20 0.106
5 spaces 62.5 x 60 x 15 mm 44-959.05 0.025
Emergency-stop pushbutton
Emergency-stop label
Marking Typ-Nr.
e
Emergency-stop label
45 mm dia., yellow, adhesiv
Front protection IP 65 when protection foil is removed
ARRET-D´URGENCE 44-951.3 0.002
EMERGENCY-STOP 44-951.2 0.002
NOT HALT 44-951.4 0.002
NOT-AUS 44-951.1 0.002
without 44-951 0.002
60 mm dia., yellow, adhesiv
Front protection IP 65 when protection foil is removed
ARRET-D´URGENCE 44-950.3 0.004
EMERGENCY-STOP 44-950.2 0.004
NOT HALT 44-950.4 0.004
NOT-AUS 44-950.1 0.004
without 44-950 0.004
90 mm dia., yellow, adhesiv
Front protection IP 65 when protection foil is removed
ARRET-D´URGENCE 44-949.3 0.009
EMERGENCY-STOP 44-949.2 0.009
NOT HALT 44-949.4 0.009
NOT-AUS 44-949.1 0.009
without 44-949 0.009