Datasheet

44
Mounting instruction
5
03.2009
To dismantle switching element, lamp element or lamp transformer, slightly lift the latching arm with the tip of a screwdriver.
0
>
0
>
Mount the actuator so that the anti-twist device faces the square area next to the mounting hole.
0
>
Base adaptors are included in the enclosure.
In the ends of the enclosure are cable entries 22.5 mm dia., fitted with an inlet grommet at one end.
A second grommet is supplied in the enclosure. In addition, a spezial screw gland M20 can be supplied Typ-Nr. 44-956.
Openings designations:
A, B, C and D
opening A is nearest to the inlet grommet.
0
Dismantling function elements
Mounting lamp transformer
Enclosure
Lamp transformer
132
Lamp transformer
132
Lamp transformer
132
Lamp transformer
132
Lamp element Lamp element
Switch element
Switch element
or
Blind element Blind element
or
Switch element
Base adaptor Front adaptor
ABCDE