User Manual

161
Technical data
ID keylock switch
Material
Actuator element
Plastic
Front ring
Plastic or metal
Actuator housing
Plastic
Mechanical characteristics
Terminals
Screw terminal front mounting
- Solid with end sleeves
1 x (0.2 … 2.5 mm
2
), 2 x (0.2 … 0.75 mm
2
)
- Solid without end sleeves
1 x (0.2 … 2.5 mm
2
), 2 x (0.2 … 0.75 mm
2
)
- Finely stranded with end sleeves
1 x (0.2 … 2.5 mm
2
), 2 x (0.25 … 0.75 mm
2
)
- Finely stranded with end sleeves
1 x (0.2 … 2.5 mm
2
), 2 x (0.2 … 0.75 mm
2
)
- For AWG cables
1 x (24 … 14), (24 … 19)
Tightening torque
Screw terminal
0.35 … 0.4
Nm
Mechanical lifetime
100 000 switching cycles
Number of NO contacts
5
ID-Key
Authorization level Key colour
1 green
1+2 yellow
1+2+3 red
1+2+3+4 blue
Electrical characteristics
Operating voltage
24 VDC
Environmental conditions
Operating temperature
–25 °C … +70 °C
Storage temperature
–40 °C … +80 °C
Protection degree
IP65
Environmental category
during operation according to IEC 60721:
3M6, 3S2, 3B2, 3C3, 3K6 (with relative air humidity
of 10 … 95 %)
Selector switch actuator
Material
Actuator element
Round lever, plastic, illuminable
Short lever, plastic, illuminable
Long lever, plastic, illuminable
Front ring
Plastic or metal
Actuator housing
Plastic or metal
Mechanical characteristics
Operating frequency
max. 1800/h
Mechanical lifetime
1 000 000 switching cycles
Vibration resistance
according to IEC 60068-2-6
10 … 500 Hz: 5 g
Shock resistance
according to IEC 60068-2-27
Sinusoidal half-wave 50 g /11 ms
Environmental conditions
Operating temperature
–25 °C … +70 °C
Storage temperature
–40 °C … +80 °C
Protection degree
IP66, IP67, IP69K
Environmental category
during operation according to IEC 60721:
3K6, 3C3, 3S2, 3M6
45