User Manual

157
Technical data
Indicator actuator
Pushbutton actuator
Material
Actuator element
Plastic
Front ring
Plastic or metal
Actuator housing
Plastic or metal
Mechanical characteristics
Vibration resistance
according to IEC 60068-2-6
2 … 500 Hz: 5 g
Shock resistance
according to IEC 60068-2-27
Sinusoidal half-wave 50 g /11 ms
Material
Actuator element
Plastic
Front ring
Plastic or metal
Actuator housing
Plastic or metal
Mechanical characteristics
Operating frequency
Lens flat/level with front bezel:
- Momentary max. 3 600/h
- Maintain max. 1 800/h
Lens flat/raised above front ring:
- Momentary max. 3 600/h
- Maintain max. 1 800/h
Lens flat/lower than front ring:
- Momentary max. 3 600/h
Lens flat/lower than front ring, with castellation:
- Momentary max. 3 600/h
Mechanical lifetime
Lens flat/level with front bezel:
- Momentary 10 000 000 switching cycles
- Maintain 500 000 switching cycles
Lens flat/raised above front ring:
- Momentary 10 000 000 switching cycles
- Maintain 500 000 switching cycles
Lens flat/lower than front ring:
- Momentary 10 000 000 switching cycles
Lens flat/lower than front ring, with castellation:
- Momentary 10 000 000 switching cycles
Environmental conditions
Operating temperature
–25 °C … +70 °C
Storage temperature
–40 °C … +80 °C
Protection degree
IP66, IP67, IP69K
Environmental category
during operation according to IEC 60721:
3K6, 3C3, 3S2, 3M6
Vibration resistance
according to IEC 60068-2-6
20 … 500 Hz: 5 g
Shock resistance
according to IEC 60068-2-27
Sinusoidal half-wave 50 g /11 ms
Environmental conditions
Operating temperature
–25 °C … +70 °C
Storage temperature
–40 °C … +80 °C
Protection degree
IP66, IP67, IP69K
Environmental category
during operation according to IEC 60721:
3K6, 3C3, 3S2, 3M6
45