Datasheet
Technical data
Toggle switch actuator
Material
Actuator element
Plastic
Front ring
Plastic or metal
Actuator housing
Plastic or metal
Mechanical characteristics
Operating frequency
Max. 1
800 / h
Mechanical lifetime
1
000 000 cycles of operation
Ambient conditions
Operating temperature
– 25 °C … + 70 °C
Storage temperature
– 40 °C … + 80 °C
Protection degree
IP66, IP67, IP69K
Vibration resistance
According to IEC 60068-2-6
10 … 500 Hz: 5 g
Shock resistance
According to IEC 60068-2-27
Sinusoidal half-wave 50 g / 11 ms
Climatic ambient conditions
During operation according to IEC 60721:
3K6, 3C3, 3S2, 3M6
Slow-make switching element
Switching system
The double-break, slow-make switching element is equipped with
normally open or normally closed contact. The normally closed
contact has forced opening. Slow-make contacts with forced
action are ideal for high switch ratings. Up to six switching ele
-
ments can be snapped to each holder.
The NC contact opens automatically upon disconnection of the
actuator. On delivery, the contact is open (= safe state).
Activation (= NC contacts on the non-actuated commanding
device are closed) takes place upon rst-time actuation after the
contact block is snapped onto the actuator.
Material
Material of contact
Silver alloy
Housing
Plastic
Mechanical characteristics
Terminals
Screw terminal
- Solid 2 x (1.0 … 1.5 mm
2
)
- With end sleeves 2 x (0.5 … 0.75 mm
2
)
- Finely stranded
- Without end sleeves 2 x (0.5 … 0.75 mm
2
)
- With end sleeves 2 x (0.5 … 1.5 mm
2
)
- For AWG cables for auxiliary contacts 2 x (18 … 14)
Spring-type terminal (SP)
- Solid 2 x (0.25 … 1.5 mm
2
)
- Finely stranded
- Without end sleeves 2 x (0.5 … 1.5 mm
2
)
- With end sleeves 2 x (0.5 … 0.75 mm
2
)
- For AWG cables for auxiliary contacts 2 x (24 … 16)
Tightening torque
Screw terminal, spring-type terminal 0.8 … 0.9 Nm
Operating frequency
Max. 3 600 / h
Mechanical lifetime
10 000 000 cycles of operation
eao.com § 01/2019
560
45
01
02
03
04
09
14
17
18
19
22
31
41
45
51
56
57
61
70
71
82
84
92
96