Baureihe Baureihe 61 Komplett. Intuitiv und vielseitig. https://eao.
61 Informationen zur Baureihe Vorteile § § § § § Schaltleistung Breite, modulare Baureihe Modernes Design Zahlreiche Schaltelemente und einfache Montage Kundenspezifische Beschriftungen möglich International anerkannte und zugelassene Baureihe Typische Einsatzgebiete § § § § § Maschinenbau Mess- und Regeltechnik Verfahrenstechnik (Klimaanlagen und Wärmetechnik) Personen- und Güterverkehr Laborinstrumente Funktionen § § § § § § § § § § Drucktaste Leuchtdrucktaste Pilzdrucktaste Wahlschalter Schlüsselsc
Inhaltsverzeichnis 61 Flache Bauform Drucktaste rund 693 Leuchtdrucktaste quadratisch 694 Leuchtdrucktaste rechteckig 695 Leuchtdrucktaste rund 696 Pilzdrucktaste 697 Wahlschalter 2 Stellungen quadratisch 698 Wahlschalter 2 Stellungen rund 699 Wahlschalter 3 Stellungen quadratisch 700 Wahlschalter 3 Stellungen rund 702 Schlüsselschalter 2 Stellungen quadratisch 704 Schlüsselschalter 2 Stellungen rechteckig 705 Schlüsselschalter 2 Stellungen rund 706 Schlüsselschalter 3 Stellungen q
61 Inhaltsverzeichnis 01 02 03 Erhabene Bauform NOT-HALT Taste 758 Komponenten 759 Zubehör 777 Technische Daten 787 Beschriftung 794 Anwendungsrichtlinien 797 04 09 14 17 18 19 22 31 41 45 51 56 57 61 70 71 82 84 92 96 692 eao.
Flache Bauform 61 Drucktaste rund, IP65 01 Gerät besteht aus (schematische Übersicht) 5.5 max. 02 A Seite 759 E 52 03 18x24 Druckhaube C Vorsatz A 2 Frontrahmen-Set Seite 763 Verdrehsicherungsring Seite 776 E F 54 49 Abmessungen [mm] A = Steckanschluss 2,8 mm x 0,5 mm C = Schraubanschluss E = Tastschaltelement F = Sprungschaltelement Befestigungsmutter NJO NJO 09 Musterabbildung kann von Ihrem ausgewählten Artikel abweichen.
1 Flache Bauform Leuchtdrucktaste quadratisch, IP65 Gerät besteht aus (schematische Übersicht) 5.5 max. 02 A E 03 A Druckhaube Seite 759 LED Seite 765 C 04 F 2 09 52 18x24 01 Musterabbildung kann von Ihrem ausgewählten Artikel abweichen. 14 E 49 54 Vorsatz Abmessungen [mm] A = Steckanschluss 2,8 mm x 0,5 mm C = Schraubanschluss E = Tastschaltelement F =Sprungschaltelement 17 18 35 min. C 24 min. A Frontrahmen-Set Seite 763 Befestigungsmutter +0.2 0 24 min. R1max.
Flache Bauform 61 Leuchtdrucktaste rechteckig, IP65 01 Gerät besteht aus (schematische Übersicht) 5.5 max. 02 A Seite 759 E A LED 52 03 18x24 Druckhaube Seite 765 C F 2 Vorsatz Frontrahmen-Set Seite 763 E 49 04 54 Abmessungen [mm] A = Steckanschluss 2,8 mm x 0,5 mm C = Schraubanschluss E = Tastschaltelement F =Sprungschaltelement NJO Befestigungsmutter NJO 09 Musterabbildung kann von Ihrem ausgewählten Artikel abweichen.
61 Flache Bauform 01 Leuchtdrucktaste rund, IP65 Gerät besteht aus (schematische Übersicht) 5.5 max. 02 A E 18x24 03 C Druckhaube Seite 759 LED Seite 765 A 04 2 09 52 Musterabbildung kann von Ihrem ausgewählten Artikel abweichen.
Flache Bauform 61 Pilzdrucktaste, IP65 01 Gerät besteht aus (schematische Übersicht) 5.5 max. 02 A E Seite 759 52 03 18x24 Druckhaube A C Vorsatz 04 2 F 10 Verdrehsicherungsring Seite 763 Seite 776 Abmessungen [mm] A = Steckanschluss 2,8 mm x 0,5 mm C = Schraubanschluss E = Tastschaltelement F = Sprungschaltelement A Befestigungsmutter C NJO ± C NJO ± A NJO ± 54 09 Musterabbildung kann von Ihrem ausgewählten Artikel abweichen.
61 Flache Bauform Wahlschalter 2 Stellungen quadratisch, IP65 A E 52 03 A Musterabbildung kann von Ihrem ausgewählten Artikel abweichen. 14 F C 24 min. A Seite 763 Befestigungsmutter 24 min. +0.2 0 Schaltelement Seite 767 21.2 22 21.2 + 0.2 0 Einbauöffnungen [mm] A = Löt-/Steckanschluss 2,8 mm x 0,5 mm C = Schraubanschluss 31 0 I Jede der unten aufgeführten Artikelnummern beinhaltet sämtliche, in der 3D-Zeichnung gezeigten, schwarzen Komponenten.
Flache Bauform 61 Wahlschalter 2 Stellungen rund, IP65 01 Gerät besteht aus (schematische Übersicht) 5.5 max. 02 A E 52 Seite 762 A LED 03 18x24 Drehgriff Seite 765 C 04 2 7 Vorsatz Frontrahmen-Set Seite 763 F 49 E Abmessungen [mm] A = Steckanschluss 2,8 mm x 0,5 mm C = Schraubanschluss E = Tastschaltelement F = Sprungschaltelement NJO Verdrehsicherungsring Seite 776 NJO 09 Musterabbildung kann von Ihrem ausgewählten Artikel abweichen.
61 Flache Bauform Wahlschalter 3 Stellungen quadratisch, IP65 01 A A Seite 762 LED Seite 765 C 04 2 F 7 Musterabbildung kann von Ihrem ausgewählten Artikel abweichen. 14 E 54 49 Vorsatz Abmessungen [mm] A = Steckanschluss 2,8 mm x 0,5 mm C = Schraubanschluss E = Tastschaltelement F = Sprungschaltelement 17 18 35 min. C 24 min. A Frontrahmen-Set Seite 763 Befestigungsmutter +0.2 0 24 min. R1max. Schaltelement Seite 771 21.2 19 22 21.2 + 0.
Flache Bauform 61 Schaltschemas 01 x2+ 02 03 x1- 04 Schaltschema 301 09 14 17 18 19 22 31 41 45 51 56 57 61 Komplett, intuitiv und vielseitig. Die bewährte EAO Baureihe 61. 70 71 Ein vielseitiges und modernes Sortiment für anspruchsvolle Industrieanwendungen. . Breite, modulare Baureihe . Modernes Design . Einfache Montage . Kundenspezifische Beschriftungen . International anerkannte und zugelassene Baureihe 82 84 92 www.eao.com 01/2019 § eao.
61 Flache Bauform Wahlschalter 3 Stellungen rund, IP65 01 A A Drehgriff Seite 762 LED Seite 765 18x24 E 52 03 C 04 2 7 09 Gerät besteht aus (schematische Übersicht) 5.5 max. 02 Musterabbildung kann von Ihrem ausgewählten Artikel abweichen.
Flache Bauform 61 Schaltschemas 01 x2+ 02 03 x1- 04 Schaltschema 301 09 14 17 18 19 22 31 41 45 51 56 57 61 70 71 82 84 92 96 01/2019 § eao.
61 Flache Bauform Schlüsselschalter 2 Stellungen quadratisch, IP65 A E 52 03 A Schlüssel C 04 2 F 27 09 Gerät besteht aus (schematische Übersicht) 5.5 max. 02 18x24 01 Musterabbildung kann von Ihrem ausgewählten Artikel abweichen. 14 E 49 54 Abmessungen [mm] A = Steckanschluss 2,8 mm x 0,5 mm C = Schraubanschluss E = Tastschaltelement F =Sprungschaltelement 17 18 35 min. C 24 min. A Schlossdruckhaube Seite 764 Vorsatz Frontrahmen-Set Seite 763 +0.2 0 24 min. R1max. 21.
Flache Bauform 61 Schlüsselschalter 2 Stellungen rechteckig, IP65 Gerät besteht aus (schematische Übersicht) 01 5.5 max. 02 A E 52 03 18x24 A Schlüssel C 04 2 Schlossdruckhaube Seite 764 F 27 E 49 54 Abmessungen [mm] A = Steckanschluss 2,8 mm x 0,5 mm C = Schraubanschluss E = Tastschaltelement F =Sprungschaltelement Vorsatz NJO Frontrahmen-Set Seite 763 NJO 09 Musterabbildung kann von Ihrem ausgewählten Artikel abweichen.
61 Flache Bauform Schlüsselschalter 2 Stellungen rund, IP65 A E 52 03 A Schlüssel C 04 2 27 09 Gerät besteht aus (schematische Übersicht) 5.5 max. 02 18x24 01 Musterabbildung kann von Ihrem ausgewählten Artikel abweichen.
Flache Bauform 61 Schaltschemas 01 02 03 04 Schaltschema 78 Schaltschema 79 09 14 17 18 19 22 31 41 45 51 EAO Downloads. www.eao.com/downloads 56 EAO ermöglicht. Seit 1947. 57 61 70 71 Auf unserer Website können Sie technische Daten, Montageanleitungen, Kataloge, Broschüren und vieles mehr downloaden. 82 84 92 www.eao.com 01/2019 § eao.
61 Flache Bauform Schlüsselschalter 3 Stellungen quadratisch, IP65 01 A 18x24 E 52 03 A Schlüssel C 04 2 F 27 09 Gerät besteht aus (schematische Übersicht) 5.5 max. 02 Musterabbildung kann von Ihrem ausgewählten Artikel abweichen. 14 E 49 54 Schlossdruckhaube Abmessungen [mm] A = Steckanschluss 2,8 mm x 0,5 mm C = Schraubanschluss E = Tastschaltelement F =Sprungschaltelement 17 18 35 min. C 24 min. A Seite 764 Vorsatz Frontrahmen-Set Seite 763 +0.2 0 24 min. R1max.
Flache Bauform 61 Schaltschemas 01 02 03 04 Schaltschema 80 Schaltschema 81 Schaltschema 82 Schaltschema 83 09 14 17 18 19 22 31 41 45 51 56 57 61 70 71 82 84 92 96 01/2019 § eao.
61 Flache Bauform Schlüsselschalter 3 Stellungen rechteckig, IP65 01 A 18x24 E 52 03 A Schlüssel C 04 2 F 27 09 Gerät besteht aus (schematische Übersicht) 5.5 max. 02 Musterabbildung kann von Ihrem ausgewählten Artikel abweichen.
Flache Bauform 61 Schaltschemas 01 02 03 04 Schaltschema 80 Schaltschema 81 Schaltschema 82 Schaltschema 83 09 14 17 18 19 22 31 41 45 51 56 57 61 70 71 82 84 92 96 01/2019 § eao.
61 Flache Bauform Schlüsselschalter 3 Stellungen rund, IP65 01 A A 18x24 E 52 03 Schlüssel C 04 2 27 09 Gerät besteht aus (schematische Übersicht) 5.5 max. 02 Musterabbildung kann von Ihrem ausgewählten Artikel abweichen.
Flache Bauform 61 Schaltschemas 01 02 03 04 Schaltschema 80 Schaltschema 81 Schaltschema 82 Schaltschema 83 09 14 17 18 19 22 31 41 45 51 Folgen Sie uns. Wir sind auf LinkedIn! 56 EAO ermöglicht. Seit 1947. 57 61 70 71 Werfen Sie noch heute einen Blick auf unser LinkedIn Profil! 82 Folgen Sie uns. https://www.linkedin.com/company/eao/ 84 92 www.eao.com 01/2019 § eao.
61 Flache Bauform 01 Leuchtmelder mit Lampenelement quadratisch, IP65 Gerät besteht aus (schematische Übersicht) 5.5 max. 02 Druckhaube Seite 759 LED Seite 765 03 04 2 09 49 Vorsatz Musterabbildung kann von Ihrem ausgewählten Artikel abweichen. Abmessungen [mm] 14 17 35 min. C 24 min. A B Frontrahmen-Set Seite 763 Befestigungsmutter 21.2 + 0.2 0 18 24 min. R1 max. 19 21.
Flache Bauform 61 Leuchtmelder mit Lampenelement rechteckig, IP65 Gerät besteht aus (schematische Übersicht) Druckhaube 01 5.5 max. 02 Seite 759 03 LED Seite 765 04 2 49 09 Vorsatz Abmessungen [mm] Frontrahmen-Set Seite 763 Musterabbildung kann von Ihrem ausgewählten Artikel abweichen. NJO C NJO A 14 B 17 Jede der unten aufgeführten Artikelnummern beinhaltet sämtliche, in der 3D-Zeichnung gezeigten, schwarzen Komponenten.
61 Flache Bauform 01 Leuchtmelder mit Lampenelement rund, IP65 Gerät besteht aus (schematische Übersicht) 5.5 max. 02 03 Druckhaube Seite 759 LED Seite 765 04 2 09 49 Vorsatz Musterabbildung kann von Ihrem ausgewählten Artikel abweichen.
Flache Bauform 61 Leuchtmelder ohne Lampenelement quadratisch, IP65 Gerät besteht aus (schematische Übersicht) Ø14.5 D Seite 759 A LED 02 B 73 03 18x24 Druckhaube 5.5 max. 01 Seite 765 C 2 04 54 49 Vorsatz Frontrahmen-Set Seite 763 Abmessungen [mm] A = Steckanschluss 2,8 mm x 0,5 mm B = Lötanschluss C = Schraubanschluss D = Blinker Befestigungsmutter 35 min. C 24 min. A 09 Musterabbildung kann von Ihrem ausgewählten Artikel abweichen. 14 17 B 18 +0.2 0 Seite 775 19 21.
61 Flache Bauform Leuchtmelder ohne Lampenelement rechteckig, IP65 Gerät besteht aus (schematische Übersicht) 5.5 max. 02 Ø14.5 01 B D 18x24 03 A Druckhaube Seite 759 LED Seite 765 C 04 2 09 73 54 49 Vorsatz Musterabbildung kann von Ihrem ausgewählten Artikel abweichen.
Flache Bauform 61 Leuchtmelder ohne Lampenelement rund, IP65 Gerät besteht aus (schematische Übersicht) Seite 759 LED Seite 765 Ø14.5 5.5 max. 02 B D 73 03 18x24 Druckhaube 01 A A 2 Vorsatz Frontrahmen-Set Seite 763 Verdrehsicherungsring Seite 776 54 04 49 Abmessungen [mm] A = Steckanschluss 2,8 mm x 0,5 mm B = Lötanschluss C = Schraubanschluss D = Blinker NJO NJO 09 Musterabbildung kann von Ihrem ausgewählten Artikel abweichen.
61 Flache Bauform Summer Gerät besteht aus (schematische Übersicht) 5.5 max. 02 03 15 01 A Vorsatz 04 45 2 09 14 Druckstück Musterabbildung kann von Ihrem ausgewählten Artikel abweichen. Abmessungen [mm] A = Steckanschluss 2,8 mm x 0,5 mm Befestigungsmutter Allgemeine Informationen NJO • Für Dauer- oder Impulston die Polarität wechseln NJO 17 18 Jede der unten aufgeführten Artikelnummern beinhaltet sämtliche, in der 3D-Zeichnung gezeigten, schwarzen Komponenten.
Flache Bauform 61 Potentiometer quadratisch, IP65 01 Gerät besteht aus (schematische Übersicht) 12 23 max. 02 03 Ø 16 Vorsatz 04 4 max. 300 Frontrahmen Abmessungen [mm] Befestigungsmutter 09 Musterabbildung kann von Ihrem ausgewählten Artikel abweichen. 14 Allgemeine Informationen NJO • Widerstand 10 kOhm / linear 17 PLQ 3 NBY Jede der unten aufgeführten Artikelnummern beinhaltet sämtliche, in der 3D-Zeichnung gezeigten, schwarzen Komponenten.
61 Flache Bauform 01 Bauteilelayouts 02 A 03 C 04 09 14 a b c B Bauteilelayout 30 A = Anschlüsse (Rückseite) B = Aderfarben Flachbandkabel C = a = blau, b = rot, c = gelb 17 18 19 22 31 41 45 51 56 57 61 Kompakt, robust, zuverlässig. Die Baureihe 61 NOT-HALT Taste. 70 71 UL-zertifiziert – Sicherheit in kompakter Bauweise für mobile Bedieneinheiten. . Sehr geringe Einbautiefe (21.2 mm) . Hohe Frontschutzart von IP69K und IP67 . Robuste Monoblock-Bauweise . Mechanisch entkoppelte Auslösung .
Flache Bauform 61 Potentiometer rund, IP65 01 Gerät besteht aus (schematische Übersicht) 12 23 max. 02 03 Ø 16 Vorsatz 04 4 max. 300 Frontrahmen Abmessungen [mm] 09 Musterabbildung kann von Ihrem ausgewählten Artikel abweichen. Verdrehsicherungsring 14 Allgemeine Informationen NJO Befestigungsmutter • Widerstand 10 kOhm / linear NJO 17 Jede der unten aufgeführten Artikelnummern beinhaltet sämtliche, in der 3D-Zeichnung gezeigten, schwarzen Komponenten.
61 Flache Bauform 01 Bauteilelayouts 02 A 03 C 04 09 14 a b c B Bauteilelayout 30 A = Anschlüsse (Rückseite) B = Aderfarben Flachbandkabel C = a = blau, b = rot, c = gelb 17 18 19 22 31 41 45 51 56 57 61 70 71 82 84 92 96 724 eao.
Erhabene Bauform 61 Leuchtdrucktaste quadratisch, IP65 01 Gerät besteht aus (schematische Übersicht) 8 max. Seite 759 E A LED 44 03 18x24 Druckhaube 02 A Seite 765 C F 42 10.6 04 E 46 Vorsatz Abmessungen [mm] A = Steckanschluss 2,8 mm x 0,5 mm C = Schraubanschluss E = Tastschaltelement F = Sprungschaltelement 35 min. Seite 767 24 min. 17 C A 24 x 24 15 Bitte zusätzlich die roten Komponenten auf den angegebenen Seiten auswählen. Ø 16.2 19 18 x 18 18 x 24 Ø18 + 0.2 0 18 +0.
61 Erhabene Bauform 01 Leuchtdrucktaste quadratisch, IP65 Gerät besteht aus (schematische Übersicht) 02 8 max. A E A Druckhaube Seite 759 LED Seite 765 C 04 F 42 10.6 E 46 Vorsatz Musterabbildung kann von Ihrem ausgewählten Artikel abweichen. 14 Abmessungen [mm] A = Steckanschluss 2,8 mm x 0,5 mm C = Schraubanschluss E = Tastschaltelement F = Sprungschaltelement 17 35 min. 24 min. 18 Befestigungsmutter C Schaltelement A Ø 1.
Erhabene Bauform 61 Leuchtdrucktaste rechteckig, IP65 01 Gerät besteht aus (schematische Übersicht) 8 max. Seite 759 E A LED 44 03 18x24 Druckhaube 02 A Seite 765 C F 42 10.6 04 E 46 Vorsatz Abmessungen [mm] A = Steckanschluss 2,8 mm x 0,5 mm C = Schraubanschluss E = Tastschaltelement F = Sprungschaltelement Seite 767 35 min. 24 min. 17 C A 24 x 24 15 Bitte zusätzlich die roten Komponenten auf den angegebenen Seiten auswählen. Ø 16.2 19 18 x 18 18 x 24 Ø18 + 0.2 0 18 +0.
61 Erhabene Bauform 01 Leuchtdrucktaste rund, IP65 Gerät besteht aus (schematische Übersicht) 02 8 max. A E A Druckhaube Seite 759 LED Seite 765 C 04 09 18x24 03 44 F 42 10.6 E 46 Vorsatz Musterabbildung kann von Ihrem ausgewählten Artikel abweichen.
Erhabene Bauform 61 Leuchtdrucktaste ohne Frontrahmen rund, IP65 01 Gerät besteht aus (schematische Übersicht) 8 max. Seite 759 Frontrahmen Seite 764 02 E 44 03 18x24 Druckhaube A A C LED Seite 765 F 10.6 42 Abmessungen [mm] A = Steckanschluss 2,8 mm x 0,5 mm C = Schraubanschluss E = Tastschaltelement F = Sprungschaltelement Vorsatz Befestigungsmutter NJO NJO 09 Musterabbildung kann von Ihrem ausgewählten Artikel abweichen.
61 Erhabene Bauform 01 Pilzdrucktaste, IP65 Gerät besteht aus (schematische Übersicht) 02 8 max. A 03 C A 04 E 18.1 Musterabbildung kann von Ihrem ausgewählten Artikel abweichen. 14 46 F 17 NJO NJO 18 19 Seite 759 Frontrahmen Seite 764 Vorsatz Befestigungsmutter C Schaltelement A Seite 767 Jede der unten aufgeführten Artikelnummern beinhaltet sämtliche, in der 3D-Zeichnung gezeigten, schwarzen Komponenten.
Erhabene Bauform 61 Wahlschalter 2 Stellungen quadratisch, IP65 Gerät besteht aus (schematische Übersicht) 8 max.
61 Erhabene Bauform 01 Wahlschalter 2 Stellungen rund, IP65 Gerät besteht aus (schematische Übersicht) 8 max. 02 A 03 A C 04 F 42 Musterabbildung kann von Ihrem ausgewählten Artikel abweichen.
Erhabene Bauform 61 Wahlschalter 3 Stellungen quadratisch, IP65 Gerät besteht aus (schematische Übersicht) 8 max.
61 Erhabene Bauform 01 Schaltschemas x2+ 02 03 x1- 04 Schaltschema 301 09 14 17 18 19 22 31 41 45 51 EAO Downloads. www.eao.com/downloads 56 EAO ermöglicht. Seit 1947. 57 61 70 71 Auf unserer Website können Sie technische Daten, Montageanleitungen, Kataloge, Broschüren und vieles mehr downloaden. 82 84 92 www.eao.com 96 734 eao.
Erhabene Bauform 61 Wahlschalter 3 Stellungen rund, IP65 01 Gerät besteht aus (schematische Übersicht) E Seite 762 A LED 02 A 44 03 18x24 Drehgriff 8 max.
61 Erhabene Bauform 01 Schaltschemas x2+ 02 03 x1- 04 Schaltschema 301 09 14 17 18 19 22 31 41 45 51 56 57 61 70 71 82 84 92 96 736 eao.
Erhabene Bauform 61 Schlüsselschalter 2 Stellungen quadratisch, IP65 01 Gerät besteht aus (schematische Übersicht) F 42 03 18x24 Schlüssel 02 A 6.5 max.
61 Erhabene Bauform 01 Schlüsselschalter 2 Stellungen rechteckig, IP65 Gerät besteht aus (schematische Übersicht) 02 A 6.5 max. F A Schlüssel C 04 10 E 35 Musterabbildung kann von Ihrem ausgewählten Artikel abweichen.
Erhabene Bauform 61 Schlüsselschalter 2 Stellungen rund, IP65 01 Gerät besteht aus (schematische Übersicht) F 42 03 18x24 Schlüssel 02 A 6.5 max.
61 Erhabene Bauform Schlüsselschalter 3 Stellungen quadratisch, IP65 01 Gerät besteht aus (schematische Übersicht) 02 A 6.5 max. F A Schlüssel C 04 10 E 35 Musterabbildung kann von Ihrem ausgewählten Artikel abweichen.
Erhabene Bauform 61 Schaltschemas 01 02 03 04 Schaltschema 80 Schaltschema 81 Schaltschema 82 Schaltschema 83 09 14 17 18 19 22 31 41 45 51 56 57 61 70 71 82 84 92 96 01/2019 § eao.
61 Erhabene Bauform Schlüsselschalter 3 Stellungen rechteckig, IP65 01 Gerät besteht aus (schematische Übersicht) 02 A 6.5 max. F A Schlüssel C 04 10 E 35 Musterabbildung kann von Ihrem ausgewählten Artikel abweichen.
Erhabene Bauform 61 Schaltschemas 01 02 03 04 Schaltschema 80 Schaltschema 81 Schaltschema 82 Schaltschema 83 09 14 17 18 19 22 31 41 45 51 Folgen Sie uns. Wir sind auf YouTube! 56 EAO ermöglicht. Seit 1947. 57 61 70 71 Werfen Sie noch heute einen Blick auf unser YouTube Profil! 82 Folgen Sie uns. https://www.youtube.com/user/eaoswitches 84 92 www.eao.com 01/2019 § eao.
61 Erhabene Bauform Schlüsselschalter 3 Stellungen rund, IP65 01 Gerät besteht aus (schematische Übersicht) 02 A 6.5 max. F A Schlüssel C 04 10 E 35 Musterabbildung kann von Ihrem ausgewählten Artikel abweichen.
Erhabene Bauform 61 Schaltschemas 01 02 03 04 Schaltschema 80 Schaltschema 81 Schaltschema 82 Schaltschema 83 09 14 17 18 19 22 31 41 45 51 56 57 61 70 71 82 84 92 96 01/2019 § eao.
61 Erhabene Bauform 01 Leuchtmelder mit Lampenelement quadratisch, IP65 Gerät besteht aus (schematische Übersicht) 02 8 max. Druckhaube Seite 759 LED Seite 765 03 04 Vorsatz Abmessungen [mm] 17 A 18 19 Ø16.2 +0.2 0 24 x 24 18 x 18 18 x 24 Ø18 15 Ø16.2 +0.1 0 Jede der unten aufgeführten Artikelnummern beinhaltet sämtliche, in der 3D-Zeichnung gezeigten, schwarzen Komponenten. Bitte zusätzlich die roten Komponenten auf den angegebenen Seiten auswählen. + 0.
Erhabene Bauform 61 Leuchtmelder mit Lampenelement rechteckig, IP65 01 Gerät besteht aus (schematische Übersicht) 02 8 max. Druckhaube Seite 759 03 LED Seite 765 10.6 04 42 09 Vorsatz Abmessungen [mm] A 18 min. Jede der unten aufgeführten Artikelnummern beinhaltet sämtliche, in der 3D-Zeichnung gezeigten, schwarzen Komponenten. B Bitte zusätzlich die roten Komponenten auf den angegebenen Seiten auswählen. Ø16.2 +0.2 0 17 24 x 24 18 x 18 18 x 24 Ø18 15 + 0.1 0 0 24 min.
61 Erhabene Bauform 01 Leuchtmelder mit Lampenelement rund, Ø 18 mm, IP65 Gerät besteht aus (schematische Übersicht) 02 8 max. 03 04 09 10.6 Druckhaube Seite 759 LED Seite 765 42 Vorsatz Musterabbildung kann von Ihrem ausgewählten Artikel abweichen. Abmessungen [mm] 14 NJO Befestigungsmutter 17 18 ± 19 NJO Jede der unten aufgeführten Artikelnummern beinhaltet sämtliche, in der 3D-Zeichnung gezeigten, schwarzen Komponenten.
Erhabene Bauform 61 Leuchtmelder ohne Frontrahmen rund, Ø 24 mm, IP65 01 Gerät besteht aus (schematische Übersicht) 02 8 max. Druckhaube Seite 759 Frontrahmen Seite 764 LED Seite 765 03 04 10.6 42 Abmessungen [mm] 09 Musterabbildung kann von Ihrem ausgewählten Artikel abweichen. 14 Vorsatz NJO NJO C A B 17 Jede der unten aufgeführten Artikelnummern beinhaltet sämtliche, in der 3D-Zeichnung gezeigten, schwarzen Komponenten.
61 Erhabene Bauform 01 Leuchtmelder ohne Lampenelement quadratisch, IP65 Gerät besteht aus (schematische Übersicht) 02 8 max. Druckhaube Seite 759 LED Seite 765 03 04 09 10.6 42 Vorsatz Musterabbildung kann von Ihrem ausgewählten Artikel abweichen.
Erhabene Bauform 61 Leuchtmelder ohne Lampenelement rechteckig, IP65 01 Gerät besteht aus (schematische Übersicht) 02 8 max. Druckhaube Seite 759 03 LED Seite 765 10.6 04 42 Vorsatz Abmessungen [mm] Befestigungsmutter Lampenelement Seite 775 NJO Y NJO Y NJO 14 17 ± ± NJO Jede der unten aufgeführten Artikelnummern beinhaltet sämtliche, in der 3D-Zeichnung gezeigten, schwarzen Komponenten.
61 Erhabene Bauform 01 Leuchtmelder ohne Lampenelement rund, IP65 Gerät besteht aus (schematische Übersicht) 02 8 max. 03 04 09 10.6 Musterabbildung kann von Ihrem ausgewählten Artikel abweichen.
Erhabene Bauform 61 Leuchtmelder ohne Frontrahmen rund, IP65 Gerät besteht aus (schematische Übersicht) Frontrahmen Ø14.5 8 max. D A Seite 764 02 B Seite 759 65 03 18x24 Druckhaube 01 C Seite 765 10.
61 Erhabene Bauform Stopp Taste, IP65 Gerät besteht aus (schematische Übersicht) 02 A 03 35.6 18x24 01 6 max. 59.5 41 Vorsatz 04 C 46 09 Musterabbildung kann von Ihrem ausgewählten Artikel abweichen.
Erhabene Bauform 61 NOT-HALT Taste kompakt, überlistsicher EN IEC 60947-5-5, IP66, IP67, IP69K 01 Ø 27 Gerät besteht aus (schematische Übersicht) 02 A Vorsatz 03 6 max. 27.5 21.2 04 Ø 40 Paneldichtung Verdrehsicherungsring A 09 Musterabbildung kann von Ihrem ausgewählten Artikel abweichen. 14 6 max. Befestigungsmutter 27.5 Jede der unten aufgeführten Artikelnummern beinhaltet sämtliche, in der 3D-Zeichnung gezeigten, schwarzen Komponenten. 21.
61 Erhabene Bauform 01 Kontakte Schaltfunktion 1Ö/2S Rast Anschluss Steckanschluss Druckhaube Farbe Druckhaube Material Ausleuchtungsart Abmessungen Art.-Nr. Schaltschema Bauteilelayout Rot Kunststoff ohne Ø 40 mm 61-6461.
Erhabene Bauform 61 Bauteilelayouts 01 02 03 23 11 12 24 11 23 24 24 11 12 04 33 34 23 12 31 32 09 Bauteilelayout 73 Bauteilelayout 74 Bauteilelayout 75 14 17 18 23 11 12 24 11 21 22 -X X1 2+ 11 12 -X X1 2+ 12 19 -X X1 2+ 22 Bauteilelayout 76 Bauteilelayout 77 Bauteilelayout 78 31 41 45 51 56 57 61 Kompakt, robust, zuverlässig. Die Baureihe 61 NOT-HALT Taste. 70 71 UL-zertifiziert – Sicherheit in kompakter Bauweise für die unterschiedlichsten Anwendungen. .
61 Erhabene Bauform NOT-HALT Taste, IP65 Gerät besteht aus (schematische Übersicht) 02 A 03 18x24 01 6 max. 35.6 Vorsatz 41 04 C 46 09 Befestigungsmutter Musterabbildung kann von Ihrem ausgewählten Artikel abweichen.
Komponenten 61 01 Druckhaube quadratisch, erhabene Bauform 02 Druckhaube Material Druckhaube Farbe Druckhaube Optik Druckhaube Form Druckhaube Ausleuchtung Abmessungen Art.-Nr. Kunststoff Rauchschwarz transparent flach ausleuchtbar 20 mm x 20 mm 61-9351.1 Rot transparent flach ausleuchtbar 20 mm x 20 mm 61-9351.2 Orange transparent flach ausleuchtbar 20 mm x 20 mm 61-9351.3 Gelb transparent flach ausleuchtbar 20 mm x 20 mm 61-9351.
61 Komponenten 01 02 Druckhaube rund, erhabene Bauform Druckhaube Material Druckhaube Farbe Druckhaube Optik Druckhaube Form Druckhaube Ausleuchtung Abmessungen Art.-Nr. Kunststoff Rauchschwarz transparent flach ausleuchtbar Ø 19,7 mm 61-9642.1 Rot transparent flach ausleuchtbar Ø 19,7 mm 61-9642.2 Orange transparent flach ausleuchtbar Ø 19,7 mm 61-9642.3 Gelb transparent flach ausleuchtbar Ø 19,7 mm 61-9642.4 Grün transparent flach ausleuchtbar Ø 19,7 mm 61-9642.
Komponenten 61 01 Druckhaube Kunststoff mit Symbol Druckhaube Material Druckhaube Farbe Druckhaube Optik Druckhaube Form Druckhaube Ausleuchtung Symbol Abmessungen Art.-Nr. Kunststoff Rot transparent flach ausleuchtbar Ring Ø 19,7 mm 61-9643.201 Orange transparent flach ausleuchtbar Ring Ø 19,7 mm 61-9643.301 Gelb transparent flach ausleuchtbar Ring Ø 19,7 mm 61-9643.401 Grün transparent flach ausleuchtbar Ring Ø 19,7 mm 61-9643.
61 Komponenten 01 Pilzdruckhaube 02 03 Druckhaube Material Druckhaube Farbe Druckhaube Optik Druckhaube Form Druckhaube Ausleuchtung Art.-Nr. Kunststoff Schwarz opak flach nicht ausleuchtbar 61-9593.0 Rot opak flach nicht ausleuchtbar 61-9593.2 04 09 Drehgriff erhabene Bauform 14 17 Drehgriff Material Drehgriff Farbe Drehgriff Ausleuchtung Drehgriff Balkenfarbe Drehgriff Form Art.-Nr. Kunststoff Schwarz ausleuchtbar Rot kurz 52-928.
Komponenten 61 01 02 Textplatte Textplatte Material Textplatte Farbe Textplatte Optik Textplatte Ausleuchtung Art.-Nr. Kunststoff Farblos transparent ausleuchtbar 61-9707.7 03 Zusätzliche Informationen 04 • Kann warmgeprägt werden 09 14 Frontrahmen-Set flache Bauform Einbauöffnung Abmessungen Schwarz 21 mm x 21 mm 24 mm x 24 mm 61-9930.0 Kunststoff Silber 21 mm x 21 mm 24 mm x 24 mm 61-9930.4 Kunststoff Schwarz 21 mm x 27 mm 24 mm x 30 mm 61-9931.
61 Komponenten 01 02 03 04 Frontrahmen-Set Pilzdrucktaste Frontrahmen Material Frontrahmen Farbe Frontrahmen Ausführung Abmessungen Art.-Nr. Aluminium Natur flach Ø 40 mm 61-9934.8 Zusätzliche Informationen • Bei eloxierten Aluminiumteilen kann es aus produktionstechnischen Gründen zu Farbunterschieden kommen 09 14 17 Schlossdruckhaube Material Farbe Abmessungen Art.-Nr. Kunststoff Schwarz 18 mm x 18 mm 61-9220.0 Schwarz 24 mm x 18 mm 61-9230.0 Schwarz Ø 18 mm 61-9210.
Komponenten 61 01 Single-LED, T1 3/4 MG Leuchtmittel Farbe Betriebsspannung Betriebsstrom Lichtstärke Dom. Wellenlänge Art.-Nr. Schaltschema Rot 6 V DC +10% 15 mA ±15 % 350 mcd 630 nm 10-2J06.3142 55 12 V AC/DC +10% 7 - 14 mA ±15 % 330 mcd 630 nm 10-2J09.1062 55 24 V AC/DC +10% 7 - 14 mA ±15 % 330 mcd 630 nm 10-2J12.1062 55 28 V AC/DC +10% 7 - 14 mA ±15 % 330 mcd 630 nm 10-2J13.1062 55 48 V AC/DC +10% 4 - 8 mA ±15 % 200 mcd 630 nm 10-2J19.
61 Komponenten 01 Schaltschemas x2+ 02 03 x1- 04 Schaltschema 55 09 14 Bi-colour LED, BA9s 17 18 19 22 Leuchtmittel Farbe Betriebsspannung Betriebsstrom Lichtstärke Dom. Wellenlänge Art.-Nr. Schaltschema Rot / Grün 24 V DC +10% 15/14 mA ±15 % 600/630 mcd 625 / 525 nm 10-A312.
Komponenten 61 01 Glühlampe Betriebsspannung Betriebsstrom Art.-Nr. Schaltschema 12 V AC/DC 75 mA ±10 % 10-1309.1309 4 14 V AC/DC 80 mA ±10 % 10-1310.1319 4 24 V AC/DC 35 mA ±10 % 10-1312.1229 4 28 V AC/DC 40 mA ±10 % 10-1313.1249 4 36 V AC/DC 30 mA ±10 % 10-1316.1209 4 48 V AC/DC 25 mA ±10 % 10-1319.
61 Komponenten 01 Schaltschemas 02 11 X2+ 11 21 X2+ 11 21 31 X2+ 13 X2+ 12 12 22 12 22 32 14 13 X2+ 2 3 13 21 X2+ 13 21 31 X2+ X1– 1 4 14 22 14 22 32 03 X1– X1– X1– X1– 14 X1– X1– 04 Schaltschema 306 09 Schaltschema 307 Schaltschema 308 13 21 33 X2+ 13 23 X2+ 13 23 33 X2+ 14 22 34 X1– 14 24 X1– 14 24 34 Schaltschema 310 Schaltschema 311 Schaltschema 313 Schaltschema 314 14 17 18 19 Schaltschema 315 Schaltschema 317 X1– Schaltschema 318 B
Komponenten 61 01 Tastschaltelement 2 Stellungen mit Steckanschluss 02 Schaltspannung Schaltstrom Kontakte Kontaktmaterial Art.-Nr. Schaltschema 250 V 5A 1S Silber 61-8610.17 310 49 5A 2S Silber 61-8620.17 317 52 5A 1Ö Silber 61-8640.17 306 46 5A 2Ö Silber 61-8650.17 307 51 5A 1Ö/1S Silber 61-8670.17 313 48 0,3 A 1S Goldplattiertes Silber 61-8610.37 310 49 0,3 A 2S Goldplattiertes Silber 61-8620.37 317 52 0,3 A 1Ö Goldplattiertes Silber 61-8640.
61 Komponenten 01 Tastschaltelement 2 Stellungen mit Schraubanschluss 02 03 Schaltspannung Schaltstrom Kontakte Kontaktmaterial Art.-Nr. Schaltschema Bauteilelayout 250 V 5A 1S Silber 61-8610.11 310 50 5A 1Ö Silber 61-8640.11 306 47 5A 1S Silber 61-8615.11 309 55 5A 2S Silber 61-8625.11 316 57 5A 1Ö Silber 61-8645.11 305 53 5A 2Ö Silber 61-8655.11 319 56 5A 1Ö/1S Silber 61-8675.
Komponenten 61 01 Sprungschaltelement 3 Stellungen mit Steckanschluss 02 Kontakte Kontaktmaterial Art.-Nr. Schaltschema 2S Silber 61-8520.12 317 60 Gold 61-8520.22 317 60 Silber 61-8550.12 307 59 Gold 61-8550.22 307 59 Gold 61-8574.22 313 58 Silber 61-8574.
61 Komponenten 01 Tastschaltelement 3 Stellungen mit Steckanschluss 02 03 04 09 Kontakte Kontaktmaterial Art.-Nr. Schaltschema Bauteilelayout 2S Silber 61-8720.17 317 63 2Ö Silber 61-8750.17 307 63 1Ö/1S Silber 61-8770.17 313 61 2S Gold 61-8720.37 317 63 2Ö Gold 61-8750.37 307 62 1Ö/1S Gold 61-8770.
Komponenten 61 Schaltschemas 01 13 23 21 11 13 21 14 24 22 12 14 22 02 03 04 Schaltschema 316 Schaltschema 319 Schaltschema 320 09 Bauteilelayouts 13 14 11 14 13 12 14 17 18 21 21 22 23 22 24 19 Bauteilelayout 54 Bauteilelayout 56 Bauteilelayout 57 22 31 41 Schaltelement NOT-HALT Schaltspannung Schaltstrom Kontakte Kontaktmaterial Anschluss Art.-Nr. Schaltschema Bauteilelayout 250 V 5A 1Ö Silber Schraubanschluss 61-8745.
61 Komponenten 01 Bauteilelayouts 11 02 12 13 14 11 12 11 13 21 21 22 21 22 12 14 22 03 04 09 Bauteilelayout 53 14 11 21 12 22 Bauteilelayout 54 Bauteilelayout 56 Bauteilelayout 64 Bauteilelayout 65 17 18 19 Bauteilelayout 66 22 31 41 Schaltelement Stopp Taste Schaltsystem Kontakte Kontaktmaterial Anschluss Art.-Nr. Schaltschema Bauteilelayout Tastschaltelement 1Ö Gold Steckanschluss 61-8745.37 321 64 2Ö Gold Steckanschluss 61-8755.
Komponenten 61 Bauteilelayouts 01 11 13 21 11 21 02 03 12 14 12 22 22 04 Bauteilelayout 64 Bauteilelayout 65 Bauteilelayout 66 09 14 Blinkelement Produkteigenschaften Anschluss Art.-Nr. Schaltschema Bauteilelayout Nur für Leuchtmelder-Vorsatz (ohne Leuchtmelder komplett) Lötanschluss 61-8000.
61 Komponenten 01 Schaltschemas x2+ 02 03 x1- 04 Schaltschema 4 09 14 Bauteilelayouts 17 X2 X1 18 X1 X2 19 22 Bauteilelayout 31 Bauteilelayout 32 31 41 45 Verdrehsicherungsring Material Einbauöffnung Art.-Nr. Metall Ø 16,2 mm 51-910 Ø 22,3 mm 61-9912.0 51 56 57 61 70 71 82 84 92 96 776 eao.
Zubehör 61 Frontseite 01 02 03 04 Beschriftungsrahmen Abmessungen Material Farbe Oberfläche Montage-Typ Art.-Nr. 30 mm x 50 mm Aluminium Schwarz eloxiert selbstklebend 61-9980.0 09 14 Zusätzliche Informationen • Für Geräte mit Frontabmessung Ø 25 mm, flache Bauform • Bei eloxierten Aluminiumteilen kann es aus produktionstechnischen Gründen zu Farbunterschieden kommen 4 18 14.5 19 Ø25 17 22 35 ± 0.3 50 ± 0.3 23.5 0 30 -0.
61 Zubehör 01 02 03 04 09 Blindabdeckung erhabene Bauform Abmessungen Material Farbe 24 mm x 24 mm Kunststoff Schwarz Einbauöffnung Art.-Nr. 18 mm x 18 mm Kunststoff Schwarz Ø 16,2 mm 51-948.0 18 mm x 24 mm Kunststoff Schwarz Ø 16,2 mm 51-947.0 Ø 18 mm Kunststoff Schwarz Ø 16,2 mm 51-949.0 61-9450.
Zubehör 61 01 02 Schutzkappe Produkteigenschaften Material Farbe Optik Art.-Nr. Zu Frontrahmen-Set 24 mm x 30 mm, flache Bauform Silikon Farblos transparent 61-9927.2 Zu Frontrahmen Ø 25 mm Silikon Farblos transparent 84-9103.7 03 04 Zusätzliche Informationen • Nur für gerade, bündige Druckhauben 09 • Bei Verwendung der Frontschutzhaube ist die Aussendichtung im Vorsatz zu entfernen 14 Hauptschlüssel 17 Produkteigenschaften Material Art.-Nr.
61 Zubehör 01 02 Schutzklappe flache Bauform Produkteigenschaften Abmessungen Material Farbe Optik Einbauöffnung Art.-Nr. Aufklappbar, plombierbar, für Gerät mit Frontabmesung 24 mm x 24 mm 24 mm x 24 mm Kunststoff Farblos transparent 21 mm x 21 mm 61-9921.0 Aufklappbar, plombierbar, für Gerät mit Frontabmes- 30 mm x 24 mm sung 24 mm x 30 mm Kunststoff Farblos transparent 27 mm x 21 mm 61-9922.
Zubehör 61 Rückseite 01 02 03 Diodenelement Anschluss Diode Art.-Nr. Schaltschema Bauteilelayout Steckanschluss 1 61-8101.02 302 33 2 61-8102.02 303 34 04 09 Schaltschemas 14 X2+ 2 X2+ 2 3 X1– 1 X1– 1 4 17 18 19 Schaltschema 302 Schaltschema 303 22 Bauteilelayouts 31 X2 X2 X1 X1 12+ 41 3+ 412+ 45 51 Bauteilelayout 33 Bauteilelayout 34 56 57 Flachsteckhülse Produkteigenschaften Material Art.-Nr.
61 Zubehör 01 02 Klemmenabdeckung Produkteigenschaften Material Art.-Nr. Zu Sprungschaltelement mit Lötanschluss Kunststoff 61-9830.2 Produkteigenschaften Abmessungen Art.-Nr. 5 Plätze 62,5 mm x 15 mm x 60 mm 02-912.1 10 Plätze 125 mm x 15 mm x 60 mm 02-912.2 15 Plätze 187,6 mm x 15 mm x 60 mm 02-912.3 20 Plätze 250 mm x 15 mm x 60 mm 02-912.4 Produkteigenschaften Material Art.-Nr. Für Sprungschaltelement, max.
Zubehör 61 Bauteilelayouts 01 02 A B D C 03 23.60 7.62 7.62 04 Ø1.0 (8x) 17.70 4.5 4.5 4.5 11, 13, 21, 23, 3+ 12, 14, 22, 24, 4- X2 21, 23, 31, 33, 122, 24, 32, 34, 2+ E X1 09 11, 13, 31 12, 14, 32 14 Bauteilelayout 67 17 Abmessungen [mm] A = Printstecksockel B = Anschlüsse (Rückseite) C = Bohrplan (Bauteilseite) D = Belegungsplan (Bauteilseite) E = Tastenverdrehschutz 18 19 A B 22 D C 31 23.00 6.80 6.80 41 Ø 1.0 (6x) 11, 13 X2 21, 23 45 12, 14 X1 22, 24 51 4.
61 Zubehör 01 Bauteilelayouts 02 A B D C 03 13.10 04 Ø1.0 (2x) E 14 17 18 X2 X2 X1 X1 X2 4.5 09 X1 Bauteilelayout 69 Abmessungen [mm] A = Printstecksockel B = Anschlüsse (Rückseite) C = Bohrplan (Bauteilseite) D = Belegungsplan (Bauteilseite) E = Tastenverdrehschutz F = Positionierungs-Bohrung 19 Vorwiderstand 22 31 41 Betriebsspannung Widerstand Art.-Nr. 110 V AC 2,7 kOhm 02-904.0 125 V AC 3,3 kOhm 02-904.1 145 V AC 4,7 kOhm 02-904.3 240 V AC 10 kOhm 02-904.
Zubehör 61 Montage 01 02 03 Aufbaugehäuse Abmessungen Material IP-Schutzart Art.-Nr. 65 mm x 57 mm x 65 mm Kunststoff IP66 61-9480.5 04 Zusätzliche Informationen 09 • Boden grau ähnlich RAL 7035; Deckel plombierbar, gelb ähnlich RAL 1004 14 65 2.5 50 65 50 57 17 18 Ø5 19 Abmessungen [mm] 22 31 Befestigungsmutter 41 Produkteigenschaften Abmessungen Material Farbe Art.-Nr.
61 Zubehör 01 02 Lampenzieher Produkteigenschaften Material Art.-Nr. Beim Lampenwechsel kann ein Schaltvorgang ausgelöst werden Kunststoff 61-9740.0 03 04 09 Montagewerkzeug Produkteigenschaften Abmessungen Material Art.-Nr. Zum Festziehen oder Lösen der Befestigungsmutter Ø 16 mm Ø 16 mm Metall 01-907 14 17 Reduktionsring 18 Material Einbauöffnung Art.-Nr.
Technische Daten 61 Vorsatz mit Sprungschaltelement 01 Schaltsystem 02 Betätigungsweg Drucktaste 3 mm Selbstreinigendes, doppelunterbrechendes Sprungschaltsystem mit Kontaktöffnungsweite 2 mm x 0,5 mm (Schalter mit kleiner Kontaktöffnungsweite im Sinne von EN IEC 61058-1). Die Schaltelemente sind wahlweise mit folgenden Schaltfunktionen erhältlich Ein bis drei Schliesser (S) oder Öffner (Ö), oder eine beliebige Kombination von S und Ö mit Anschlüssen für T1 3/4 LED oder Glühlampe.
61 Technische Daten 01 02 Spannungsfestigkeit Klimafestigkeit 2500 VAC, 50 Hz, 1 Minute, nach DIN / IEC 60512-2 zwischen allen Anschlüssen und Erde Feuchte Wärme, zyklisch 96 Stunden, + 25 °C / 97 %, + 55 °C / 93 % relative Feuchtigkeit, nach EN / IEC 60068-2-30 Überspannungskategorie III, nach EN / IEC 60947-5-1 03 04 Schutzklasse Feuchte Wärme, konstant 56 Tage, + 40 °C / 93 % relative Feuchtigkeit, nach EN / IEC 60068-2-78 II, nach EN / IEC 61058-1 Verschmutzungsgrad 09 3, nach EN / IEC 60947
Technische Daten Mechanische Kennwerte 61 Schutzklasse 01 II, nach EN / IEC 61058-1 Anschlüsse – Löt- / Steckanschluss starr 1 Draht 0,5 … 1,5 mm² 2 Drähte 0,75 mm² – Schraubanschluss 1 Draht 0,5 … 1,5 mm² 2 Drähte 0,75 mm² 02 Verschmutzungsgrad flexibel 0,5 … 0,75 mm² 0,5 mm² hochflexibel 0,5 mm² 3, nach EN / IEC 60947-1 03 Elektrische Kennwerte für Silberkontakte 0,5 … 0.
61 Technische Daten 01 02 03 04 09 Schaltspannung und Schaltstrom Schwingfestigkeit Wechselstrom mit Goldkontakt, Gebrauchskategorie AC-15, nach EN / IEC 60947-5-1 (sinusförmig) Max.
Technische Daten Elektrische Kennwerte Umgebungsbedingungen Ausleuchtung Glühlampe Stromaufnahme Single-LED Stromaufnahme 61 01 Einsatztemperatur 14 VAC / DC 80 mA 12 VAC / DC 15 mA 28 VAC / DC 44 mA 28 VAC / DC 18 mA Blinkerfrequenz 0 °C … + 45 °C 02 Schutzart Nach EN / IEC 60529 IP65 frontseitig IP40 rückseitig 03 Zertifikate 09 04 1 Hz ± 0,25 Hz Relative Einschaltdauer ca.
61 Technische Daten 01 02 Not-Halt Taste kompakt, überlistsicher EN IEC 60947-5-5 Material Durchgangswiderstand Prüfung Pilzdruckhaube Kunststoff Bei 20 mV, 100 mA (IEC 60512-2-1) Isolationswiderstand 2 MΩ zwischen den offenen Kontakten 7 MΩ gegenüber Panel (DIN IEC 60512-3-1) 04 Vorsatzgehäuse Konventioneller therm. Strom in freier Luft Ith Kunststoff 0,5 A (EN IEC 60947-5-1 / max. zulässiger Strom bei Dauerbetrieb und max.
Technische Daten 61 Schockfestigkeit Zertifikate Max. 150 m / s2, Impulsbreite 11 ms, 3-Achsen (halbsinusförmig EN IEC 60068-2-27) Zulassungen Schwingfestigkeit UL NISD (cULus, UL EU) LISTED E-File-Nr.: E341760 CB (EN 60947) 02 Max.
61 Beschriftung 01 02 03 04 09 14 17 Allgemeine Hinweise 1. Gravuren 3. Filmeinlagen Nebst den gebräuchlichen Weltsprachen, in DIN1451-3 Engschrift, stehen weitere Schriftsätze in skandinavisch, slawisch, griechisch, russisch und polnisch zur Verfügung. Rote, blaue und schwarze Druckhauben werden mit weisser Farbe gefüllt. Andere Druckhauben erhalten eine schwarze Füllung. Standard Schrifthöhe ist 2 mm. Ohne Angabe liefern wir Gravuren in 2 mm Schrifthöhe.
Beschriftung 61 Druckhauben zu Leuchtmelder und Leuchtdrucktasten, erhabene Bauform 01 Alle Dimensionen in mm Anzahl Grossbuch- Anzahl Kleinbuch- 02 Frontabmessung Filmeinlage staben pro Zeile staben pro Zeile (Druckhaube) max.
61 Beschriftung 01 Gravur Bezeichnungsschilder Alle Dimensionen in mm 02 Schrifthöhe h Anzahl Zeilen Anzahl Buchstaben pro Zeile (Richtwert) 3,0 1 11 03 3,0 2 11 4,0 1 7 04 8,0 1 4 Ø25 50 14 h 09 17 30 18 19 22 31 41 45 51 56 57 61 70 71 82 84 92 96 796 eao.
Anwendungsrichtlinien 61 Schutzbeschaltung 01 Beim Schalten induktiver Lasten wie zum Beispiel Relaisspulen, Gleichstrommotoren und Gleichstrommagneten ist es notwendig, Stossspannungen (z. B. mit einer Diode) zu absorbieren, um die Schalterkontakte zu schützen. Wenn diese induktiven Lasten ausgeschaltet werden, können die dabei entstehenden Selbstin duktionsspannungen die Schalterkontakte schwer schädigen und die Lebensdauer stark verkürzen. Abb.