Datasheet

61-2101.0/D - Keylock switch actuator 2 positions square

61-2101.0/D - Keylock switch actuator 2 positions

square

Attention: The preview is based on a sample product. This can

differ from your current configuration.

Mounting

Mounting cut-out Ø 16 mm

Design raised

Other Attributes

Weight 0,065 kg

Operating-/Indication part

Switching angle 42° right

IP-Rating

Front protection IP65

Actuator

Switching action Rest(a) - Momentary

Switching element

Rotary positions 2

Function

Keylock switch

Stand: 29.11.2019

PAGE 1
61-2101.0/D - Keylock switch actuator 2 positions square 61-2101.0/D - Keylock switch actuator 2 positions square Mounting Mounting cut-out Design Other Attributes Weight Ø 16 mm raised 0,065 kg Operating-/Indication part Switching angle IP-Rating Front protection Attention: The preview is based on a sample product. This can differ from your current configuration. Actuator Switching action Switching element Rotary positions Function Keylock switch Stand: 29.11.
PAGE 2
61-2101.0/D - Keylock switch actuator 2 positions square Dimensions Additional information Standard lock: DOM 311 Two keys are supplied with each key lock switch Optional lock numbers on request If mounted with anti-twist device, the lug is on the left side Anti-twist ring not needed by using anti-twist device Legend Switching action: A = Rest, B = Momentary L1 = Solder/Plug-in terminal 2.8 x 0.5 mm Mounting cut-outs L1 = Solder/Plug-in terminal 2.8 x 0.