Datasheet

Technical data
Electric strength
2500
VAC, 50 Hz, 1 minute, as per DIN / IEC 60512-2-11 between
all terminals and earth
Overvoltage category
III, as per EN
/ IEC 60947-5-1
Protection class
II, as per EN
/ IEC 61058-1
Degree of pollution
3, as per EN
/ IEC 60947-1
Ambient conditions
Storage temperature
–
40 °C … + 85 °C
Operating temperature
–
25 °C … + 55 °C
Protection degree
As per EN
/ IEC 60529
IP65 front side
IP40 rear side
Shock resistance
(semi-sinusoidal)
Max. 10
m/s², pulse width 11 ms, 3-axis,
as per EN
/ IEC 60068-2-27
Vibration resistance
(sinusoidal)
Max. 100
m/s² at 10 Hz … 500 Hz, as per EN / IEC 60068-2-6
Climate resistance
Damp heat, cyclic
96 hours, +25 °C/97 %, +55 °C/93 % relative humidity,
as per EN IEC 60068-2-30
Damp heat, state
56 days, +40 °C/93 % relative humidity, as per EN IEC 60068-2-78
Rapid change of temperature
100 cycles, -40 °C … +80 °C, as per EN IEC 60068-2-14
Approvals
Approbations
CB (IEC 61058)
CB (IEC 60947)
CSA
ENEC (EN 61058)
CCA-NTR (EN 60947)
CCC
CENELEC (IEC 60947-5-1)
DNV GL (previously Germanischer Lloyd)
GOST
UL
SEV
NFF
Conformities
CE
Actuator with slow-make switching element
Switching system
Double-break slow-make system, contact opening width
2 x 1.5
mm, with 2 x 2 contact points per switching element.
NC-contact elements in the slow-make elements fulll requirements
of switches with forced opening as per EN
/ IEC 60947-5-12.17.
The slow-make elements are optionally obtainable with the following
switching functions 1 NO or 2 NO, 1 NC or 2 NC, 1 NO + 1 NC.
Material
Lens
Raised mounting Plastic, as per UL 94 HB,
Flush mounting Plastic, as per UL 94 V0, or Aluminium anodized
Front bezel
Plastic, as per UL 94 V0, or Aluminium anodized
Material of contact
Silver or gold (specied for operation for low level switching)
Switching element
Plastic, as per UL 94 V0
Actuator housing
Plastic, as per UL 94 V0, self-extinguishing
eao.com § 01/2019
788
61
01
02
03
04
09
14
17
18
19
22
31
41
45
51
56
57
61
70
71
82
84
92
96