Datasheet

Technical data
Electrical characteristics
Electrical life
at 5
VDC, 1 mA 500 000 cycles of operation
Switching voltage and switching current
Max. 12
VDC, 50 mA
Min. 1
VDC, 10 mA
Electric strength
250
VAC for 1 minute
Ambient conditions
Storage temperature
– 30 °C … + 85 °C
Operating temperature
– 20 °C … + 70 °C
Approvals
Conformities
CE
2011 / 65 / EC (RoHS)
Switching element non-illuminated Part No. 70-201.0
Switching system
Short-travel switching system with two independent contact points
and tactile operation. Guarantees reliable switching even of very
light loads 1 normally open contact
Material
Material of contact
Gold-plated silver
Switching element
Plastic
Mechanical characteristics
Actuating force
With overlay foil 2.1
N ± 0.2 N
Max. actuating force >
50 N, as per DIN 42115
Actuating travel
Approx. 0.5
mm
Resistance to heat of soldering
260
°C, 3 s, as per IEC 60068-2-20
Mechanical lifetime
≥
5 Mio. cycles of operation (switching element without overlay)
≥
1 Mio. cycles of operation (switching element under overlay)
Protection
IP40 (only switching element)
IP65 front side with overlay foil
Electrical characteristics
Electrical life
≥ 500 000 cycles of operation at 42 VDC, 50 mA,
as per IEC 60512-5-9c
When attention is paid to the direction of current ow from terminal
¾ to ½ the electrical life can be prolonged.
Switching voltage and switching current
Switching voltage min. 50 mV AC / DC
max. 42 V AC / DC
Switching current min. 10 μA AC / DC
max. 100 mA AC / DC
Power rating max. 2 W
Electric strength
500 VAC, 50 Hz, 1 minute, as per IEC 60512-2-4a
Ambient conditions
Storage temperature
– 40 °C … + 85 °C
Operating temperature
– 25 °C … + 70 °C
Approvals
Conformities
CE
2011 / 65 / EC (RoHS)
EAO reserves the right to alter specications without further notice.
eao.com § 06/2019
812
70
01
02
03
04
09
14
17
18
19
22
31
41
45
51
56
57
61
70
71
82
84
92
96