Datasheet

Dimensions [mm]
Single-LED, BA9s
Illumination colour Operating voltage Operation current Lumi. Intensity Dom. Wavelength Part No.
Wiring
diagram
Red 6 V AC/DC +10% 17 mA ±15 % 400 mcd 630 nm 10-2506.1082 70
12 V AC/DC +10% 16 mA ±15 % 390 mcd 630 nm 10-2509.1142 70
24 V AC/DC +10% 15 mA ±15 % 350 mcd 630 nm 10-2512.1142 70
28 V AC/DC +10% 13 mA ±15 % 300 mcd 630 nm 10-2513.1142 70
48 V AC/DC +10% 8 mA ±15 % 200 mcd 630 nm 10-2519.1052 70
130 V AC/DC +10% 3 mA ±15 % 120 mcd 630 nm 10-2524.3042 70
130 V AC/DC +10% 5 mA ±15 % 180 mcd 630 nm 10-2H24.2052 70
230 V AC/DC +10% 3 mA ±15 % 120 mcd 630 nm 10-2H25.2042 70
Yellow 6 V AC/DC +10% 17 mA ±15 % 340 mcd 587 nm 10-2506.1084 70
12 V AC/DC +10% 16 mA ±15 % 340 mcd 587 nm 10-2509.1144 70
24 V AC/DC +10% 15 mA ±15 % 300 mcd 587 nm 10-2512.1144 70
28 V AC/DC +10% 13 mA ±15 % 270 mcd 587 nm 10-2513.1144 70
48 V AC/DC +10% 8 mA ±15 % 180 mcd 587 nm 10-2519.1054 70
130 V AC/DC +10% 3 mA ±15 % 110 mcd 587 nm 10-2524.3044 70
130 V AC/DC +10% 5 mA ±15 % 160 mcd 587 nm 10-2H24.2054 70
230 V AC/DC +10% 3 mA ±15 % 110 mcd 587 nm 10-2H25.2044 70
Green 6 V AC/DC +10% 7 mA ±15 % 1050 mcd 525 nm 10-2506.1085 70
12 V AC/DC +10% 7 mA ±15 % 1050 mcd 525 nm 10-2509.1145 70
24 V AC/DC +10% 7 mA ±15 % 1050 mcd 525 nm 10-2512.1145 70
28 V AC/DC +10% 7 mA ±15 % 1050 mcd 525 nm 10-2513.1145 70
48 V AC/DC +10% 4 mA ±15 % 600 mcd 525 nm 10-2519.1055 70
130 V AC/DC +10% 2 mA ±15 % 300 mcd 525 nm 10-2524.3045 70
130 V AC/DC +10% 3 mA ±15 % 450 mcd 525 nm 10-2H24.2055 70
230 V AC/DC +10% 2 mA ±15 % 300 mcd 525 nm 10-2H25.2045 70
Blue 6 V AC/DC +10% 17 mA ±15 % 780 mcd 470 nm 10-2506.1086 70
12 V AC/DC +10% 16 mA ±15 % 720 mcd 470 nm 10-2509.1146 70
24 V AC/DC +10% 15 mA ±15 % 680 mcd 470 nm 10-2512.1146 70
28 V AC/DC +10% 13 mA ±15 % 590 mcd 470 nm 10-2513.1146 70
48 V AC/DC +10% 8 mA ±15 % 400 mcd 470 nm 10-2519.1056 70
130 V AC/DC +10% 3 mA ±15 % 200 mcd 470 nm 10-2524.3046 70
130 V AC/DC +10% 5 mA ±15 % 230 mcd 470 nm 10-2H24.2056 70
230 V AC/DC +10% 3 mA ±15 % 200 mcd 470 nm 10-2H25.2046 70
White 6 V AC/DC +10% 5 mA ±15 % 750 mcd x: 0.31 / y: 0.32 nm 10-2506.1089 70
12 V AC/DC +10% 8 mA ±15 % 1200 mcd x: 0.31 / y: 0.32 nm 10-2509.1149 70
24 V AC/DC +10% 7 mA ±15 % 1050 mcd x: 0.31 / y: 0.32 nm 10-2512.1149 70
28 V AC/DC +10% 5 mA ±15 % 750 mcd x: 0.31 / y: 0.32 nm 10-2513.1149 70
48 V AC/DC +10% 5 mA ±15 % 750 mcd x: 0.31 / y: 0.32 nm 10-2519.1059 70
130 V AC/DC +10% 1,5 mA ±15 % 225 mcd x: 0.31 / y: 0.32 nm 10-2524.3049 70
130 V AC/DC +10% 2 mA ±15 % 300 mcd x: 0.31 / y: 0.32 nm 10-2H24.2059 70
230 V AC/DC +10% 1,5 mA ±15 % 225 mcd x: 0.31 / y: 0.32 nm 10-2H25.2049 70
Additional information
• The specied 6 V DC, 24 V DC Bi-colour; 130 V AC, 130 V DC and 230 V AC versions are built with a
protection diode
• The specied 12, 24, 28, 48 VAC/DC versions are built with a bridge rectier
• The specied 130 VAC types are developed to run on a supply voltage of 130 VAC only
• An operation at a higher supply voltage using commercial lampholders with integrated resistors, is not
approved
• If the 24VDC Bi-colour lamp is driven with normal polarity (plus on middle contact of the lamp) the rst
mentioned colour will light up, with inverted polarity the second colour will ligth up
• The luminous intensity stated is for when used with DC
• Electricalandopticaldataaremeasuredat25°C
• Luminosity and wave length variations caused by LED manufacturing processes may cause slight diffe-
rences regarding the illumination. The customer has to decide what resistor shall be used to the LED
Components
eao.com § 07/2019
204
04
01
02
03
04
09
14
17
18
19
22
31
41
45
51
56
57
61
70
71
82
84
92
96
Ø10 max.
25 max.
29 max.
B
A