Datasheet

Single-LED, BA9s, EN 50155, Fail Safe
Illumination colour Operating voltage Operation current Lumi. Intensity Dom. Wavelength Part No.
Wiring
diagram
Red 72 V AC/DC 2,2 mA -30%/+25% 4 x 128 mcd 625 nm 10-4H21.1032P 368
110 V AC/DC 2 mA -30%/+25% 4 x 128 mcd 625 nm 10-4H22.1032P 368
Yellow 72 V AC/DC 2,2 mA -30%/+25% 4 x 112 mcd 589 nm 10-4H21.1034P 368
110 V AC/DC 2 mA -30%/+25% 4 x 128 mcd 589 nm 10-4H22.1034P 368
Green 72 V AC/DC 2,2 mA -30%/+25% 4 x 478 mcd 525 nm 10-4H21.1035P 368
110 V AC/DC 2 mA -30%/+25% 4 x 510 mcd 525 nm 10-4H22.1035P 368
Blue 72 V AC/DC 2,2 mA -30%/+25% 4 x 90 mcd 465 nm 10-4H21.1036P 368
110 V AC/DC 2 mA -30%/+25% 4 x 86 mcd 465 nm 10-4H22.1036P 368
White 72 V AC/DC 2,2 mA -30%/+25% 4 x 382 mcd 10-4H21.1039P 368
110 V AC/DC 2 mA -30%/+25% 4 x 446 mcd 10-4H22.1039P 368
Additional information
• A suitable LED remover Part No. 700.006.0
• The luminous intensity stated is for when used with DC
• Electricalandopticaldataaremeasuredat25°C
• The specied72and110VAC/VDCversionsarebuiltwithabridgerectier
• Thespecied72and110VAC/VDCversionsarebuiltwithaprotectiondiode
• In case one LED fails, the other pair of still functioning LED›s is working. The light output then is half in
order to indicate the malfunction and shows this way the need for replacement
• Luminosity and wave length variations caused by LED manufacturing processes may cause slight diffe-
rences regarding the illumination. The customer has to decide what resistor shall be used to the LED
Dimensions [mm]
A = (standard)
B = (super bright)
Wiring diagrams
Wiring diagram 368
Components
x2(+)
x1(-)
AC/DC
eao.com § 07/2019
208
04
01
02
03
04
09
14
17
18
19
22
31
41
45
51
56
57
61
70
71
82
84
92
96
Ø10 max.
25 max.
29 max.
B
A