Datasheet

Technical data
Switching voltage and switching current
as per EN IEC 60947-5-1 (cos
φ 0.3)
AC-15: 230
V, 6 A AC-15: 400 V, 4 A
AC-15: 500
V, 2,5 A DC-13: 24 V, 10 A
DC-13: 60
V, 3 A DC-13: 110 V, 1 A
Recommended minimum operational data
Gold-silver contacts:
Voltage
5 VDC 24 VDC 110 VDC
Current
15 mA 5 mA 2 mA
Hard silver contacts:
Voltage
24 VDC 110 VDC
Current
50 mA 10 mA
Protection class
Indicators and switches, t for mounting into devices with protec
-
tion class II
Ambient conditions
Storage temperature
–
40 °C … + 85 °C
Operating temperature
–
40 °C … + 55 °C
(other temperatures on request)
Protection degree
IP00
Shock resistance
(single impacts, semi-sinusoidal)
300 m / s² pulse width 11 ms, as per DIN EN 60068-2-27
Vibration resistance
(sinusoidal)
100 m3 / s² at 10 Hz … 500 Hz, amplitude 0.75 mm, as per
DIN EN 60068-2-6
Approvals
Approbations
CB (IEC 60947-5-1)
CCC
CSA
DNV GL (previously Germanischer Lloyd)
EAC
NFF 16-102
UL
SEV (EN / IEC 60947-5-1
Conformities
CE
2014 / 35 / EU (LVD)
2011 / 65 / EC (RoHS)
Slow-make switching element PIT
Switching system
The double-break, slow-make switching element is equipped with
one or two independent contact systems, acting as normally open
or normally closed contact. The normally closed contact has
forced opening.
Slow-make contacts with forced action are ideal for high switch
ratings.
Up to three switching elements can be snapped to each actuator.
For the emergency-stop pushbutton use the slow-make switching
element (max. 2).
Material
Material of contact
Hard silver and gold-silver
Switch housing
Plastic
Mechanical characteristics
Terminals
PIT push-in terminal
Skinning 8 mm
Wire cross-section:
Wire 0.2 to 1.0 mm²
Stranded wire 0.2 to 1.0 mm² without core and sleeve
Stranded wire 0.2 to 0.75 mm² with core and sleeve
eao.com § 07/2019
248
04
01
02
03
04
09
14
17
18
19
22
31
41
45
51
56
57
61
70
71
82
84
92
96