Datasheet

Technical data
Lamp block PIT
Material
Housing
Plastic
Mechanical characteristics
Terminals
PIT push-in terminal
Skinning 8
mm
Wire cross-section:
Wire 0.2 to 1.0
mm²
Stranded wire 0.2 to 1.0
mm² without core and sleeve
Stranded wire 0.2 to 0.75
mm² with core and sleeve
Electrical characteristics
Standards
The switches comply with EN IEC 60947-1/EN IEC 60947-5-1
Illumination
Voltage 250
V max.
Power 2.6
W max.
BA9s standard adaptable.
Ambient conditions
Storage temperature
– 40 °C … + 85 °C
Operating temperature
– 40 °C … + 55 °C
(other temperatures on request)
Protection degree
IP20
Shock resistance
(single impacts, semi-sinusoidal)
300 m / s² pulse width 11 ms, as per DIN EN 60068-2-27
Vibration resistance
(sinusoidal)
100 m / s² at 10 Hz … 500 Hz, as per DIN EN 60068-2-6 and
EN 61373 Increased broad band noise, class 1B
Dual lamp block
Material
Housing
Plastic
Mechanical characteristics
Terminals
PIT push-in-terminal
Strip length L = 8 mm
Wire cross section
Max. wire cross section 0.2 to 1.0 mm²
Max. wire cross section of stranded cable 0.2 bto 0.75 mm² with
bootlace ferrules
Electrical characteristics
Lighting
Illuminant = 2 SMD-LEDs white
Operating voltages
24 VDC (–
30 % / + 25 %)
110 VDC (–
30 % / + 25 %)
Operating current
Typ. 8 mA
Ambient conditions
Storage temperature
– 40 °C … + 85 °C
Operating temperature
– 40 °C … + 60 °C
(other temperatures on request)
Degree of protection
IP20
Resistance to shock
500 m/s², pulse duration 11 ms, according to EN IEC 60068-2-27
(semi-sinusoidal)
Broadband noise
5.72 m/s² per axis, 5 h (duration), class 1B according to
DIN EN 61373
eao.com § 07/2019
252
04
01
02
03
04
09
14
17
18
19
22
31
41
45
51
56
57
61
70
71
82
84
92
96