Datasheet

Mushroom-head cap

Lens material Lens colour Lens optics Lens shape Lens illumination Part No.

Plastic Blue transparent mushroom-head illuminative 84-7114.600A

Black opaque mushroom-head non illuminative 84-7124.000A

Red opaque mushroom-head non illuminative 84-7124.200A

Marking plate

Marking plate material Marking plate colour Marking plate optics Marking plate illumination Part No.

Plastic Colourless transparent illuminative 61-9707.7

Additional information

• Can be hot stamped

Single-LED, T1 3/4 MG

Illumination colour Lumi. Intensity Dom. Wavelength Forward voltage Part No.

Wiring

diagram

Red 160 mcd 625 nm 2.0 VDC @ 20 mA 10-2601.3172S 4

Amber 165 mcd 605 nm 2.0 VDC @ 20 mA 10-2601.3173S 4

Yellow 600 mcd 580 nm 2.9 VDC @ 20 mA 10-2603.3174S 4

Green 650 mcd 525 nm 3.2 VDC @ 20 mA 10-2603.3175S 4

Blue 250 mcd 467 nm 3.0 VDC @ 20 mA 10-2603.3176S 4

White 500 mcd x: 0.31 / y: 0.32 nm 3.2 VDC @ 20 mA 10-2603.3178S 4

Additional information

• The customer has to decide what series resistor shall be used to the LED

• Luminosity and wave length variations caused by LED manufacturing processes may cause slight diffe-

rences regarding the illumination. The customer has to decide what resistor shall be used to the LED

Wiring diagrams

Wiring diagram

Components

x2+

x1-

eao.com § 01/2019

918