Datasheet
Component layouts
Component layout 82
Dimensions [mm]
A = Switching element with illumination
B = Single LED
C = Drilling plan (component side)
D = Hole for switching element, pad max. Ø 2.5 mm
E = Hole for LED
Illuminationelement with plug-in terminal
IP Protection Illumination colour Operating voltage Terminal Part No.
Wiring
diagram
IP40 Red 12 V DC ±10 % Plug-interminal 84-8001.2320 351
Yellow 12 V DC ±10 % Plug-interminal 84-8001.4320 351
Green 12 V DC ±10 % Plug-interminal 84-8001.5320 351
Blue 12 V DC ±10 % Plug-interminal 84-8001.6320 351
White 12 V DC ±10 % Plug-interminal 84-8001.9320 351
Red 24 V DC ±10 % Plug-interminal 84-8001.2620 351
Amber 24 V DC ±10 % Plug-interminal 84-8001.3620 351
Yellow 24 V DC ±10 % Plug-interminal 84-8001.4620 351
Green 24 V DC ±10 % Plug-interminal 84-8001.5620 351
Blue 24 V DC ±10 % Plug-interminal 84-8001.6620 351
White 24 V DC ±10 % Plug-interminal 84-8001.9620 351
Additional information
• LED and built-in resistor included
• Standard version: Cable length 300 mm with insulated ferrule, plug-in terminal 2.8 mm x 0.5 mm
• Other options on request: Customisation of cable and connectors, rear side fully sealed (IP 67)
• Protection degree (rear side): IP 40, upgrade to IP 67 with plug Part No. 84-900 possible. With applicati-
ons where strong vibrations occure, the plugs may become loose
• Luminosity and wave length variations caused by LED manufacturing processes may cause slight diffe-
rences regarding the illumination. The customer has to decide what resistor shall be used to the LED
Components
01/2019 § eao.com
923
84
01
02
03
04
09
14
17
18
19
22
31
41
45
51
56
57
61
70
71
82
84
92
96
10.16
12.70
10.16
C
C
C
C
B
B
1
3
4
2
K
A
Ø1.0 (2x)
Ø1.3 (4x)
D
E
B
A
C