Datasheet

Technical data
Ambient conditions
Storage temperature
-25
°C … +80 °C
Operating temperature
-25
°C … +65 °C
Front protection
IP 65 front side, as per EN IEC 60529
IP 67 front side, as per EN IEC 60529
IP 20 rear side
Shock resistance
(semi-sinusoidal)
Max. 150
m / s², pulse width 11 ms, 3-axis,
as per EN IEC 60068-2-27
Vibration resistance
(sinusoidal)
Max. 50
m / s² at 10 Hz … 500 Hz, 10 cycles, 3-axis,
as per EN IEC 60068-2-6
Climate resistance
Damp heat, cyclic
96 hours, +
25 °C /97 %, + 55 °C / 93 % relative humidity,
as per EN IEC 60068-2-30
Damp heat, steady
56 days, + 40 °C / 93 % relative humidity,
as per EN IEC 60068-2-78
Dry heat
96 hours, + 65 °C, as per EN IEC 60068-2-2
Low temperature
96 hours, – 25 °C, as per EN IEC 60068-2-1
Saline mist
96 Stunden, + 35 °C in chemical solution NaCl,
as per EN IEC 60068-2-11 (pending)
Approvals
Approbations
CB (IEC 60947-5-1, IEC 60947-5-5, pending))
UL NISD (pending)
CCC (pending)
Declaration of conformity
CE
2006 / 42 / EC (MD)
2011 / 65 / EC (RoHS)
Switching element illuminated pushbutton
Switching system
Short-travel switching system with 2 independent contact points
and tactile operation.
Guarantees reliable switching even of very light loads.
Fitted with 1 normally open contact.
Material
Connection cable
Plastic, short-time heat-resistant up to 105
°C
Material of contact
Silver alloy gold plated
Switching element
Plastic, as per UL 94 V0 and
Plastic, as per UL 94 HB
Mechanical characteristics
Terminals
Plug-in terminals 2.8
mm x 0.8 mm (solderable)
Flat ribbon cable 0.5 mm²
PCB terminal
Actuating force
4.0 N ±0.2 N
Actuating travel
~ 0.5 mm
Resistance to heat of soldering
250 °C, 3 s (PCB assembly)
320 °C, 3 s (when using a soldering iron)
Mechanical lifetime
≥ 1 million cycles of operations
Electrical characteristics
Illumination
Single-Chip LED, green, orange, red, yellow, white and blue
Operation Voltage 12 VDC 24 VDC
Current consumption 10 mA 10 mA
01/2019 § eao.com
939
84
01
02
03
04
09
14
17
18
19
22
31
41
45
51
56
57
61
70
71
82
84
92
96