Datasheet

Technical data
Electrical life
as per EN IEC 60512-5
5 million cycles of operation 24 VAC, 50 mA at 480 Ω
5 million cycles of operation 24 VAC, 100 mA at 240 Ω
2 million cycles of operation 42 VAC, 50 mA at 840 Ω
2 million cycles of operation 42 VAC, 100 mA at 420 Ω
300 000 cycles of operation 42 VAC, 100 mA at cos
φ 0.4
250 000 cycles of operation 42 VAC, 200 mA at cosφ 0.395
1 million cycles of operation 12 VDC, 250 mA at 48 Ω
1 million cycles of operation 24 VDC, 50 mA at 480 Ω
1 million cycles of operation 24 VDC, 100 mA at 240 Ω
5 million cycles of operation 42 VDC, 25 mA at 1680 Ω
1.5 million cycles of operation 42 VDC, 50 mA at 840 Ω
100 000 cycles of operation 42 VDC, 100 mA at 420 Ω
500 000 cycles of operation 24 VDC, 200 mA at L/R = 30 ms
300 000 cycles of operation 42 VDC, 100 mA at L/R = 30 ms
100 000 cycles of operation 42 VDC, 200 mA at L/R = 30 ms
Switching voltage and switching current
Voltage
50 mVAC/DC … 42 VAC/DC
Current
10 uA … 100 mA
Power
max. 2 W
Electric strength
500
VAC, 50 Hz, 1 minute, as per DIN IEC 60512-2
Ambient conditions
Storage temperature
– 40 °C ... + 85 °C
Operating temperature
– 25 °C ... + 70 °C
Protection degree
Back protection:
IP40, standard version
IP67, fully sealed version, with mounted actuator only.
Shock resistance
(semi-sinusoidal)
Max. 100 m / s², pulse width 11 ms, 3-axis,
as per EN IEC 60068-2-27
Vibration resistance
(sinusoidal)
Max. 50 m / s² at 10 Hz … 500 Hz, 10 cycles, 3-axis,
as per EN IEC 60068-2-6
Switching element Halo Compact
Switch configuration
A complete switch requires a halo compact programmable switch
actuator body (transparent) and a lens. If the switch needs lens
illumination in addition then a translucent plastic lens or aluminium
lens with a window is required.
Use Halo Compact with illuminated pushbutton actuator (Part No.
84-1081.7) or with the indicator actuator (Part No. 84-0080.7).
The illumination style is selected by the connection of 24V to the
pins.
Material
Housing
Plastic
Plastic (sealing compound)
Material of contact
Silver alloy, gold-plated
The materials used comply with the high EAO standards
relating to quality, functional safety, service life and design.
Mechanical characteristics
Terminals
Soldering / plug-in terminals
2.8 mm x 0.8 mm (solderable)
Actuating force
4.0 N ± 0.2 N
(measured at the lens)
Actuating distance
~ 0.5 mm
Mechanical lifetime
≥ 1 million cycles of operation
eao.com § 01/2019
940
84
01
02
03
04
09
14
17
18
19
22
31
41
45
51
56
57
61
70
71
82
84
92
96