Datasheet

Technical data
Electrical characteristics
Switching element
Short-travel snap-action switching system with two independent
contact points and tactile operation.
Number of contacts: one normal open contact
Output
Electronic high-side switch
Pre-congured light sequences
- Full illumination
- Blinking (interval: 1 second)
- Rotating/chasing (one full rotation per second)
- Process (changeover a group of 4 LEDs per second)
Special feature
Integrated electronic switch for maintained action
(High-side switch)
Operating voltage
24
VDC ± 10 %
Max. 100
mA
Current consumption
<
80 mA
LED-colours
All versions available with eight SMD LEDs for halo illumination
plus one single LED (3mm) for central illumination. The following
variants are available:
8 x red LEDs + 1 white single LED
8 x green LEDs + 1 white single LED
8 x yellow LEDs + 1 white single LED
8 x white LEDs + 1 white single LED
8 x blue LEDs + 1 white single LED
8 x red
/green bi-colour LEDs + 1 white single LED
Ambient conditions
Storage temperature
– 40 °C ... + 85 °C
Operating temperature
– 25 °C ... + 70 °C
Degree of protection
IP67 front side
(with actuator Part No. 84-1081.7 and 84-0080.7)
Shock resistance
(semi-sinusoidal)
Max. 100 m / s², pulse width 6 ms, 3-axis,
as per EN IEC 60068-2-27
Vibration resistance
(sinusoidal)
Max. 50 m / s² at 10 Hz … 500 Hz, 10 cycles, 3-axis,
as per EN IEC 60068-2-6
Approvals
Conformities
CE
2014 / 30 / EU (EMC)
2011 / 65 / EC (RoHS)
Light sequences central LED IN1 IN2 IN3
not illuminated illuminated
1 – 0 VDC 0 VDC 0 VDC
2 – + 24 VDC 0 VDC 0 VDC
3 – 0 VDC + 24 VDC 0 VDC
4 – + 24 VDC + 24 VDC 0 VDC
– 5 0 VDC 0 VDC + 24 VDC
– 6 + 24 VDC 0 VDC + 24 VDC
– 7 0 VDC + 24 VDC + 24 VDC
– 8 + 24 VDC + 24 VDC + 24 VDC
* Functionen of light sequence:
1/5 = Full illuminiation
2/6 = Blink
3/7 = Rotation
4/8 = Process
01/2019 § eao.com
941
84
01
02
03
04
09
14
17
18
19
22
31
41
45
51
56
57
61
70
71
82
84
92
96