Datasheet

Application guidelines
Arrangement mounting flange for switching- and illumination element, PCB mounting
The arrangement of the mounting anges and their number is
determined by the size of the front panel or PCB. To ensure uni
-
form, tactile switching, we recommend a layout of the anges as
per adjacent sketch.
For large PCBs with several switching elements we recommend
the following procedure:
1.
Fit the actuator to the front panel.
2.
Clip the mounting ange to the rear of the intended actuator.
3.
Screw the PCB with the components soldered to it to the
assembled mounting ange.
This arrangement applies to PCBs 1.6
mm thick.
25...30
25...30
max. 60
max. 60
Dismantling mounting flange
The tool Part No. 84-998 must be used for removing the mounting
ange from the actuator.
Before removing the ange, the PCB xing srews must be loo-
sened.
01/2019 § eao.com
945
84
01
02
03
04
09
14
17
18
19
22
31
41
45
51
56
57
61
70
71
82
84
92
96