User Manual

20 21
care
care
Cleaning the Exterior
1 You should inspect and clean your Tweak
every day. To clean, gently wipe the surface
with a soft, dry cloth or a moist non-alcohol
disinfecting wipe. Do not allow water or
liquid to enter any openings.
The daily use of a TweakDry UV® appliance is
recommended to reduce moisture and wax
buildup. www.tweakhearing.com
Cleaning the Tip and Tube
1 Remove the sound tube from the case by
unscrewing the tube connector from the
sound post (turning counterclockwise).
most ampli er repairs are
caused to moisture and earwax
clean
ampli er
daily
1
1
2
3
2 Wipe the exterior of
the tube and tip.
3 Thread the cleaning
tool wire through the
tube connector and out of
the tip. Wipe end of wire
and repeat as necessary
to remove moisture and
debris from the tube.
Do not rinse or submerge these parts in water. There is risk of damage if a water
drop becomes trapped in the tube. If this should occur, it will prevent sound from
coming through the tube and may be harmful to Tweak’s electronics.