User Manual

28 29

how to reset

After wearing Tweak for a while, you may decide you want to try a

different Amplification Setting than the one you initially selected.

However, if you simply want more bass sound, remove the vented

dome tip and attached one of the closed dome tips instead. This may

resolve the issue and resetting is no longer necessary.

Tweak may be reset by following these simple steps.

3 While still pressing and holding the rocker

switch, close the battery door.

4 Continue holding the rocker switch. Wait at

least 14 seconds before releasing the rocker

switch.

5 Open the battery door.

6 When you close the battery door again,

Tweak is reset.

You may now proceed to select a new

Amplification Setting. See page 16 for setup.

1 With a battery inserted, open the

battery door.

2 Press and hold the upper or

lower portion of the rocker switch.