Quick Start Guide

ManualsBrandsEar Tech ManualsHealth & WellnessTweak Enhance App Control Personal Sound Amplifier - Beige

TW ENHN QSG 0521 Rev A

red light on base–

fault in the instrument, base,

cable, or adapter

Call 1-888-815-3240 for assistance.

Program Suitable for Indicator

1 Conversation 1 Beep

2 Restaurant 2 Beeps

3 Traffic 3 Beeps

4 Outdoor 4 Beeps

tweakhearing.com | 1-888-815-3240

Level 1 Level 2 Level 3

Level 4

MAX Volume

Beep Beep Beep 2 Beeps

Level 1 Level 2 Level 3

Level 4

MAX Volume

Beep Beep Beep 2 Beeps

preparing for use

wearing tweak enhance

using tweak enhance

box contents

charging information

1 Choose either a left or

right sound tube.

sound tube

vented

dome

retaining

lock

BLUE: Left RED: Right

cleaning tool

carrying casecharging basepower cablepower block

sound tubes,

size 2B, left and right

sound tipsamplifier

cleaning line

tube connector

head

rocker switch /

switch programs,

volume control

microphone 1

microphone 2

1 Plug

the

type-C USB

connector into

the charging base.

3 The charging base is marked with blue and red circles.

Place amplifier in the corresponding port. it will shut

off automatically when placed in the charger.

The rocker switch will glow blue while charging. When

fully charged, the rocker switch will glow green.

green light on base–

normal operation

left

ear

right

ear

2 Attach tube connector end to sound post on

amplifier. Twist tube clockwise until snug.

sleeve

tip

closed

domes

vented

domes

Choose tip to use with

sound tube.

1 Place Tweak Enhance

over your ear. The

curve of the sound

tube should rest

on top of your ear

comfortably, even

with glasses.

2 Grab the loose end of

the tubing and gently

insert the tip into the

ear canal.

3 Position the retaining

lock in the bowl of the

ear.

When properly inserted,

the tubing will lay close

to the head around the

front of the ear and into

the ear canal. Check this

by moving your finger

down the tubing, into

the ear.

Turning ON and OFF

Refer to the APP GUIDE inside the user manual to set up the Enhance devices using the

Tweak Enhance app. App can be downloaded at the App Store or Google Play Store.

Scan the QR card at left for a shortcut to accessing the app.

Volume Control

Memory Switch

To turn ON or OFF, press and hold the upper portion

of the rocker switch until you hear a beep (approx. 3

seconds) then release. While you are holding the rocker

switch, it will turn green. The green light will turn off

once the amplifier is ON.

To turn OFF, press and hold the upper portion of the

rocker switch until you hear a beep (approx. 3 seconds)

then release. While you are holding the rocker switch,

it will turn blue. The blue light will turn off once the

amplifier is OFF.

ON —

rocker switch will  ash green;

power is ON

OFF —

rocker switch will  ash blue

then shut o

The rocker switch is used

as a volume control.

Pressing the upper portion

of the rocker switch

increases the volume,

while the lower portion

reduces the volume.

When the hearing instrument is turned

ON, it will revert to the last program and

volume setting.

To switch programs, press and hold the

lower portion of the rocker switch for

two seconds then release. Do the same

to switch to the other programs.

4 Align tip with end of sound tube and push tip

straight on.

Program 1

Program 2

Program 3

Program 4

2 Plug the

opposite

end of the

cable into

adapter block

then connect

with power source.

Fully charge Tweak Enhance before proceeding to setup.

SCAN ME

As you increase/decrease

the volume, you will hear

beep sounds for each

sound level.

Now you are ready to install

the Tweak Enhance app on your

phone and set up your devices.

quick start guide