User's Manual

ManualsBrandsEarda Technologies ManualsElectronicsWi-Fi Module

EWN‐1638ACX2AA User manual

Product function

The module is mainly used for wireless network communication, with built‐in

wireless network protocol ieee802.11b.g.n.a.ac protocol stack and TCP / IP protocol

stack. At the same time, the integrated Bluetooth part of the module supports BT4.2

at most, which is mainly used for short‐distance wireless communication and can

support most Bluetooth devices.

Usage method

1. Connect the RF antenna of corresponding frequency band for the module.

2. Insert the module into the PCIe port on the computer motherboard.

3. Use the driver wizard or other relevant driver loading software to update the

driver.

4. After the driver update is completed, you can see that there will be

corresponding network card drivers in the network adapter column in the device

manager. Click the WLAN connection to search for available wireless networks;

similarly, after the Bluetooth update driver, you can see the normal Bluetooth

icon in the device manager, and the small blue icon appears in the task bar in the

lower right corner. Click with the mouse to pop up the menu bar, that is "Add

Summary of content (6 pages)

PAGE 1
EWN‐1638ACX2AA User manual Product function The module is mainly used for wireless network communication, with built‐in wireless network protocol ieee802.11b.g.n.a.ac protocol stack and TCP / IP protocol stack. At the same time, the integrated Bluetooth part of the module supports BT4.2 at most, which is mainly used for short‐distance wireless communication and can support most Bluetooth devices. Usage method 1. Connect the RF antenna of corresponding frequency band for the module. 2.
PAGE 2
Bluetooth device" is available. 5. if the WLAN connection shows that it has been connected, it indicates that the connection is successful; after the Bluetooth device is opened, select "opened Bluetooth device" on the dialog box of the computer, and press "next", the computer will automatically search for Bluetooth devices that can be connected. Select the Bluetooth device you want to connect and follow the prompts to connect. After the connection is successful, you can use it.
PAGE 3
technician for help important announcement Important Note: Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Country Code selection feature to be disabled for products marketed to the US/Canada.
PAGE 4
separate FCC authorization. End Product Labeling The final end product must be labeled in a visible area with the following" Contains FCC ID: 2AMM6-1638AA Manual Information to the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual.
PAGE 5
Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01 2.2 List of applicable FCC rules CFR 47 FCC PART 15 SUBPART C has been investigated. It is applicable to the modular transmitter 2.
PAGE 6
Antenna No. Model No. of antenna: Type of antenna: Gain of the antenna (Max.) BT/2.4GWIFI/5GWIFI Antenna 0 / External antenna 0dBi 2.4GWIFI/5GWIFI Antenna 2 / External antenna 0dBi Frequency range: 2400-2500MHz 5100-5250MHz 5700-5850MHz 2400-2500MHz 5100-5250MHz 5700-5850MHz 2.8 Label and compliance information The final end product must be labeled in a visible area with the following" Contains FCC ID: 2AMM6-1638AA ". 2.