Data Sheet

Module：EWN-8258FAT1CC
Waiting for your suggestion at anytime.
-
20 -
E-mail：[e-mail]
Integration instructions for host product manufacturers according to KDB 996369 D03
OEM Manual v01
2.2 List of applicable FCC/IC rules
FCC Part 15 Subpart C 15.247 & 15.207 & 15.209& RSS GEN&RSS 247
2.3 Specific operational use conditions
The module is a ZigBee module with 2.4G function.
Operation Frequency:
2405-2480MHz
Number of Channel: 16 Modulation:
OQPSK
Type: PCB Antenna
Gain:
-1.99
dBi Max.
The module can be used for mobile or applications with a maximum 0.5dBi antenna. The
host manufacturer installing this module into their product must ensure that the final composit
product complies with the FCC/IC requirements by a technical assessment or evaluation to the
FCC/IC rules, including the transmitter operation. The host manufacturer has to be aware not to
provide information to the end user regarding how to install or remove this RF module in the
user's manual of the end product which integrates this module. The end user manual shall
include all required regulatory information/warning as show in this manual.
2.4 Limited module procedures
Not applicable. The module is a Single module and complies with the requirement of FCC
Part 15.212.
2.5 Trace antenna designs
Not applicable. The module has its own antenna, and doesn’t need a host’ s printed board
microstrip trace antenna etc.
2.6 RF exposure considerations
The module must be installed in the host equipment such that at least 20cm is maintained
between the antenna and users’ body; and if RF exposure statement or module layout is changed,
then the host product manufacturer required to take responsibility of the module through a
change in FCC ID/IC or new application. The FCC ID/IC of the module cannot be used on the final
product. In these circumstances, the host manufacturer will be responsible for re-evaluating the
end product (including the transmitter) and obtaining a separate FCC/IC authorization