User Manual

Tap and hold for 2s (L)
Noise cancelling control
Noise cancelling/Ambient sound/
Normal
Power on Blue indicator flashes for 1s
Power off Red indicator flashes for 1s
Factory reset Indicator flashes in purple
Pairing mode Indicator flashes in blue
Successfully connected Indicator turns off
If you fail to build connection between two earbuds, or between earbuds and Bluetooth devices,
please try the following steps:
1.Place both earbuds into the charging case.
2. Keep the charging case open, then press and hold the reset button for at least 8s
until both earbuds flash in purple, then earbuds have been reset successfully.
3.Delete the previous connection from the Bluetooth device and reconnect “EarFun Air Pro 3”.
Tap and hold for 2s (R)
Voice assistant
Answer and transfer two calls
Tap triple (L/R)
Activate the voice assistant
06
Reset and Reconnecting
Earbuds LED Indicator