User Manual

ADJUSTING THE PROGRAM

AMPLIFICATION LEVELS

Your Eargo devices have four programs, ranging from low ampliﬁcation

(Program 1) to maximum (Program 4). To go from one program to the

next, use a ﬂat hand to ﬁrmly and rapidly double tap over your ear canal.

The switch responds to the pressure created when you tap, not the touch

of your hand.

Your Eargo device will let you know when you’ve changed programs.

With every double tap, your Eargo will say, “Program 1,” “Program 2,”

“Program 3,” or “Program 4.” It will progress through all 4 programs

and then repeat from the beginning. More or fewer than two taps will

not change the program. If you don’t hear the program number, wait

a second and then try again

Programs are highly personal and often vary between ears and in

different settings. Each ear is different, so do this for each ear

independently. And remember, your Eargo devices should make

sounds and speech crisper, but not louder.

To get a sense of how rapid a double tap should be to

change programs, visit

eargo.com/showme to see

a visual demonstration.