User Manual

• Do not use hearing device during X-rays, MRIs, CT scans or other similar
medical treatment to prevent damage to the hearing device.
• Check for electronic or wireless restrictions prior to using hearing device,
or charger to prevent electrical interference to nearby equipment.
• Do not expose hearing device to contaminants such as hair spray, mousse,
gel, lotions, etc. to prevent damage to the hearing device.
• Avoid exposure to water or long term exposure to moisture to prevent damage to
hearing device and charger.
• Do not dry hearing device with a hairdryer. Heat may damage hearing device.
• Only clean hearing device with brush and dry cloth. Be careful to prevent any
damage to the hearing device.
• To prevent damage and/or malfunction, do not modify hearing device, charger, or
accessories.
• Do not replace battery.
WIRELESS TECHNICAL DESCRIPTION
• Your Eargo hearing aid system is classified as a Group 1, Class Type B device as
applied part under the IEC 60601-1 medical device standard.
• Your Eargo hearing aid system, specifically the charger, contains a radio
transceiver operating in the frequency range of 2.4 GHz to 2.48 GHz.
• This hearing aid model has been tested to, and has passed, the following EMC,
emissions, and immunity tests:
• FCC CFR 47 Part 15, subpart C
• IEC 60601-1-2 radiated emissions requirements for a Group 1, Class B
device as stated in CISPR 11.
• Immunity to ESD levels of +/- 8 kV conducted discharge and +/- 15 kV
air discharge.
76