User Guide

T26 User Guide

Play music via Bluetooth

1. Power on the speaker, the default mode is Bluetooth, the screen display “blue” will flash.

2. Open the Bluetooth of your device, search “EARISE T26”, click to pair.

3. To adjust the volume of music, you can adjust the master volume knob on the speaker or

adjust the volume on your Bluetooth device.

4. If you want to adjust the volume of mic separately, you can adjust the volume of music on

your Bluetooth device and adjust the volume of mic via the master volume knob.

Play music via USB flash drive

1. Insert the USB flash drive, the speaker plays existing music automatically.

2. The song file format must be MP3.

3. The capacity of the USB flash drive must be 8G to 32G.

4. The USB flash drive must be USB 2.0 and the file system must be FAT32.

5. If the USB flash drive is formatted, the file system is not FAT32, it can’t work.

Play music via TF card

1. Insert the TF card, the speaker plays existing music automatically.

2. The song file format must be MP3.

3. The capacity of the TF card must be 8G to 32G.

4. The file system of the TF card must be FAT32.

PAGE 1
T26 User Guide Play music via Bluetooth 1. Power on the speaker, the default mode is Bluetooth, the screen display “blue” will flash. 2. Open the Bluetooth of your device, search “EARISE T26”, click to pair. 3. To adjust the volume of music, you can adjust the master volume knob on the speaker or adjust the volume on your Bluetooth device. 4.
PAGE 2
Echo function 1. Press the “ECHO” button to select the intensity of the reverb, EC0 is off, and EC3 is the strongest. Record function 1. Insert the TF card or USB flash drive, please ensure enough recording storage space. 2. Please make sure there is at least one song in the TF card or USB flash drive, otherwise the recording function will not work. 3. Please turn on the microphone before press the "REC" button, otherwise the recording function will not work. 4.
PAGE 3
Connect a second microphone 1. There is a MIC IN jack (the 6mmAUX jack) on the speaker for a second microphone. 2. If connect to a wired microphone, just connect it via the MIC IN jack. 3. If connect to a wireless microphone, just connect the wireless receiver with the MIC IN jack. But please note that the frequency of the wireless mic can not be 261.8MHz, or it will cause interference with the original mic. Charge the speaker 1.