Operating instructions

3
EXPLODED PARTS VIEW
Key Description Part No.
01. Needle and fluid tip tool V0018
02. Air cap ring V0001
03. Air cao V0002
04. Spray direction plate V0003
05. Fluid tip 2.0mm V0004
06. Fluid tip O-Ring V0005
07. Fluid needle 2.0mm V0006
Key Description Part No.
08. Lip seal - Fluid needle V0007
09. Paint flow adjuster V0011
10. Paint container seal L0682
11. Pick-up tube V0012
12. Paint container V0014
13. Viscosity Cup SG243
14. Filter (not shown) L0058
12
11
10
9
8
7
6
5
4
3
2
1
A
B
PARTS LIST
1b
1a
2a
2b
Set Up
Connect the striped tube to the
bottom of the Spray Pack (Fig.1, 1a)
and the other end to the paint pick
up (Fig.1, 1b) of the Spray Gun,
and connect the unstriped tube to
the top of the SprayPack (Fig.1, 2a)
and the other end to the air outlet on
the Spray Gun (Fig.1, 2b).
HINT: Running the end of the tubes
under warm water will ease the
fitting onto the Spray Gun and Spray
Pack.
L0061 01-11.qxd:L0061 08/02 (A5).qxd 7/1/11 11:08 Page 3