EARLEX SPRAY STATION HV2900/3900 HV3500 OPERATING INSTRUCTION MANUAL Thank you for purchasing the Earlex Spray Station. BEFORE USE – PLEASE READ THE MANUAL AND SAFETY INSTRUCTIONS. Please retain for future reference.
EXPLODED PARTS VIEW Fig.1 3 2 5 4 6 7 9 8 10 11 1 B A 12 Fig.3 Fig.
PARTS LIST Fig.1 No.Description 1. Needle and Fluid Tip Tool 2. Air Cap Ring 3. Air Cap 4. Spray Direction Plate 5. Fluid Tip 2.0mm 6. Fluid Tip O-Ring PARTS LIST HV3500 Part Code V0018 V0001 V0002 V0003 V0004 V0005 No.Description 7. Fluid Needle 2.0mm 8. Lip Seal - Fluid Needle 9. Paint Flow Adjuster 10. Paint Container Seal 11. Pick-up Tube 12. Paint Container Part Code V0006 V0007 V0011 L0682 V0012 V0014 Fig.2 No.Description 13. Hose 14. Filter Part Code L1064 L0290 PARTS LIST HV2900/3900 Fig.
PREPARATION • Carefully cover areas which are not to be painted with a plastic cover and protective tape. • Wear a suitable mask when spraying products (and make sure there is adequate ventilation in the room when working indoors). • Clean the surface you are going to paint. As well as being clean, it must also be dry and smooth. • Practice first on some old wooden planks to make sure you are holding the Spray Gun correctly. • We recommend you wear protective clothing.
The most commonly used technique for painting a large surface is the ‘crisscross’ technique, i.e. you apply the product in a horizontal strips and then cross over these strips by applying the product in a vertical strips (Fig.7). 1) To achieve a horizontal strip adjust the Spray Direction Plate (4) to the vertical position then pull the Trigger and move your arm across to the right. Fig.
TROUBLESHOOTING PROBLEM CAUSE ACTION REQUIRED The paint drips onto item being painted Paint too diluted Add undiluted paint Paint output too high Reduce the paint output by adjusting the Paint Flow Adjuster (9) Moving too slowly Increase speed of application Spray Trigger held for too long Release Trigger sooner Spray Gun too close Increase the distance between the Spray Gun and the work surface Paint too diluted Add undiluted paint Paint output too low Increase the paint output by adjustin
PLEASE NOTE: We have done all we can to ensure that when used correctly and in accordance with these instructions the spray gun has a long and fault-free life.
Earlex Ltd. Earlex Ltd, Tel: +44 (0)1483 454 666 Email: enquiries@earlex.co.uk Website: www.earlex.
