Installation Guide

16
CARE & MAINTENANCE
Earth’s Flame is durably constructed of 304 Stainless Steel providing a long life of
service. There is no regular maintenance required other than ash removal. Ash
removal can be accomplished with a standard fireplace tool set or an ash vacuum.
When using an ash vacuum be sure and follow the manufacturer’s instructions paying
particular attention to hot ashes in the fireplace.
The refractory panel used in Earth’s Flame is very durable in the fireplace environment.
It can be broken if it is heavily impacted with logs or fireplace tools. Be careful when
putting logs into the fireplace, moving logs in the fireplace, or when cleaning ashes.
Should it become necessary a replacement panel can be obtained from Earth’s Flame
and installed per the instructions contained in this manual.
If Earth’s Flame is ever removed from the fireplace make sure that the dimensions of
the grate, as outlined in this instruction manual, have not changed before re-inserting
the grate into the fireplace. Make sure the set screws are tight before reinserting the
grate. Review the installation instructions and ensure the system is configured correctly
before it is re-installed.
Still Have Questions?
Remember that improper installation, adjustment, or any alteration of the Earth’s
Flame product can cause injury, property damage or loss of life. Should you
have any questions relating to the proper installation or operation of the Earth’s
Flame product, please contact a qualified installer or local distributer before any
attempted operation of the product, or you may reach Earth’s Flame directly at
888- 201- 8805.